Video Review of Transformers Kingdom Battle Across Time Sideswipe And Skywarp

o.supreme wrote:Saw these yesterday. It is interesting that they didn't include the cab swivel/pivot for Road Ranger, so he could be an exact copy of Huffer.

Jelze Bunnycat wrote:

o.supreme wrote:Saw these yesterday. It is interesting that they didn't include the cab swivel/pivot for Road Ranger, so he could be an exact copy of Huffer.

Could you explain that? Road Ranger is the alt-head retool of Huffer and has the cab facing up, while Puffer is made from the Pipes version of the tooling and has the cab facing back.

o.supreme wrote:

Jelze Bunnycat wrote:

o.supreme wrote:Saw these yesterday. It is interesting that they didn't include the cab swivel/pivot for Road Ranger, so he could be an exact copy of Huffer.

Could you explain that? Road Ranger is the alt-head retool of Huffer and has the cab facing up, while Puffer is made from the Pipes version of the tooling and has the cab facing back.

Sure. The only difference in the Transformation of Kindgom Pipes vs Kingdom Huffer is that they added a swivel on the back of the Cab, so, as you say the cab can face backward. I just thought since Road Ranger was likely produced later, I'm not sure why they just didn't keep the swivel (although unnecessary, since he is as you say a Huffer Repaint (except for the head)), instead of switching back, and eliminating it just t be exactly like Huffer.

Jelze Bunnycat wrote:

o.supreme wrote:

Jelze Bunnycat wrote:

o.supreme wrote:Saw these yesterday. It is interesting that they didn't include the cab swivel/pivot for Road Ranger, so he could be an exact copy of Huffer.

Could you explain that? Road Ranger is the alt-head retool of Huffer and has the cab facing up, while Puffer is made from the Pipes version of the tooling and has the cab facing back.

Sure. The only difference in the Transformation of Kindgom Pipes vs Kingdom Huffer is that they added a swivel on the back of the Cab, so, as you say the cab can face backward. I just thought since Road Ranger was likely produced later, I'm not sure why they just didn't keep the swivel (although unnecessary, since he is as you say a Huffer Repaint (except for the head)), instead of switching back, and eliminating it just t be exactly like Huffer.

It's possible that swivel is gang-molded with the Pipes parts, thus for Pipes only. Hey, one less point of breakage.

Emerje wrote:Finally saw Wave 3 Deluxes in store for the first time, at Target. Or at least I saw two Tracks and two Wheeljacks there. Already have them so I was hoping for wave 4. Still no Worlds Collide set, might have to turn to eBay or beg my neighbors to the north for that set soon since it hasn't been restocked (if being available for 3 minutes in the middle of the night and being scooped up by bots counts as restocking) on Target.com for a month or more.

Emerje

william-james88 wrote:

Emerje wrote:Finally saw Wave 3 Deluxes in store for the first time, at Target. Or at least I saw two Tracks and two Wheeljacks there. Already have them so I was hoping for wave 4. Still no Worlds Collide set, might have to turn to eBay or beg my neighbors to the north for that set soon since it hasn't been restocked (if being available for 3 minutes in the middle of the night and being scooped up by bots counts as restocking) on Target.com for a month or more.

Emerje

I can provide it rather easily. Problem is you'll be paying quite a bit for it. It's $105 USD before shipping, so somewhere around $150 total.

This listing here is better than how much you'd pay by going through any canadian friend

https://rover.ebay.com/rover/1/711-53200-19255-0/1?siteid=0&pub=5574891718&campid=5336631220&customid=&toolid=10001&mkevt=1&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F255129114817%3Fh%20...%20SwkIRhOpOK%3C%2Fa%3E%26

Yeah, but then I'd have to give my money to a scalper so I'm trying to resist it. How much to ship loose? It's going to be a little while longer before I can go that rout, as I prepare for my new job money isn't going to be entirely consistent for a few weeks next month.

Emerje

Emerje wrote:

william-james88 wrote:

Emerje wrote:Finally saw Wave 3 Deluxes in store for the first time, at Target. Or at least I saw two Tracks and two Wheeljacks there. Already have them so I was hoping for wave 4. Still no Worlds Collide set, might have to turn to eBay or beg my neighbors to the north for that set soon since it hasn't been restocked (if being available for 3 minutes in the middle of the night and being scooped up by bots counts as restocking) on Target.com for a month or more.

Emerje

I can provide it rather easily. Problem is you'll be paying quite a bit for it. It's $105 USD before shipping, so somewhere around $150 total.

This listing here is better than how much you'd pay by going through any canadian friend

https://rover.ebay.com/rover/1/711-53200-19255-0/1?siteid=0&pub=5574891718&campid=5336631220&customid=&toolid=10001&mkevt=1&mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2F255129114817%3Fh%20...%20SwkIRhOpOK%3C%2Fa%3E%26

Yeah, but then I'd have to give my money to a scalper so I'm trying to resist it. How much to ship loose? It's going to be a little while longer before I can go that rout, as I prepare for my new job money isn't going to be entirely consistent for a few weeks next month.

Emerje

Sabrblade wrote:Megatron's final Kingdom card - https://twitter.com/onyxminor/status/1438280848835551232



Unites Cybertron
Under Decepticon
Rule

RiddlerJ wrote:For some of you that have had Tracks for a while now, is he still holding together or flying apart as many people have feared.

I finally picked him up an am terrified of doing anything with him, given how tight the transparent plastic has to tab together. Not to mention, I transformed him once and already see stress marks on parts of him.

Overcracker wrote:

RiddlerJ wrote:For some of you that have had Tracks for a while now, is he still holding together or flying apart as many people have feared.

I finally picked him up an am terrified of doing anything with him, given how tight the transparent plastic has to tab together. Not to mention, I transformed him once and already see stress marks on parts of him.

I have a stress mark on the windshield roof from tabbing and untabbing from the hood hooks.

Stressmark_Tracks.jpg

Outside ion that and the tiny stress mark on the pin holding the leg panel in he's fine.

RiddlerJ wrote:

Overcracker wrote:

RiddlerJ wrote:For some of you that have had Tracks for a while now, is he still holding together or flying apart as many people have feared.

I finally picked him up an am terrified of doing anything with him, given how tight the transparent plastic has to tab together. Not to mention, I transformed him once and already see stress marks on parts of him.

I have a stress mark on the windshield roof from tabbing and untabbing from the hood hooks.

Stressmark_Tracks.jpg

Outside ion that and the tiny stress mark on the pin holding the leg panel in he's fine.

That windshield roof tab terrifies me. It has to clip in so tight.

But one thing that I haven't read about is that the transformation joints on Tracks shoulders are so tight that flipping them in and out cause stress marks on mine. I circled where on the pic (the pic isn't mine it's just for reference). There's also stress marks on the front car panels for some reason.

There's just so much wrong with this figure. I wanted Road Rage but am now reconsidering.

Kingdom-Deluxe-Tracks-01-e1620748930807.png

AcademyofDrX wrote:

RiddlerJ wrote:

Overcracker wrote:

RiddlerJ wrote:For some of you that have had Tracks for a while now, is he still holding together or flying apart as many people have feared.

I finally picked him up an am terrified of doing anything with him, given how tight the transparent plastic has to tab together. Not to mention, I transformed him once and already see stress marks on parts of him.

I have a stress mark on the windshield roof from tabbing and untabbing from the hood hooks.

Stressmark_Tracks.jpg

Outside ion that and the tiny stress mark on the pin holding the leg panel in he's fine.

That windshield roof tab terrifies me. It has to clip in so tight.

But one thing that I haven't read about is that the transformation joints on Tracks shoulders are so tight that flipping them in and out cause stress marks on mine. I circled where on the pic (the pic isn't mine it's just for reference). There's also stress marks on the front car panels for some reason.

There's just so much wrong with this figure. I wanted Road Rage but am now reconsidering.

Kingdom-Deluxe-Tracks-01-e1620748930807.png

It's definitely over-engineered and disappointing, but are stress marks really a deal-breaker? I'm at the point where I'm pretty much okay with anything short of outright breakage, and I don't have an assumption that they're going to remain completely intact forever.

RiddlerJ wrote:

AcademyofDrX wrote:

RiddlerJ wrote:

Overcracker wrote:

RiddlerJ wrote:For some of you that have had Tracks for a while now, is he still holding together or flying apart as many people have feared.

I finally picked him up an am terrified of doing anything with him, given how tight the transparent plastic has to tab together. Not to mention, I transformed him once and already see stress marks on parts of him.

I have a stress mark on the windshield roof from tabbing and untabbing from the hood hooks.

Stressmark_Tracks.jpg

Outside ion that and the tiny stress mark on the pin holding the leg panel in he's fine.

That windshield roof tab terrifies me. It has to clip in so tight.

But one thing that I haven't read about is that the transformation joints on Tracks shoulders are so tight that flipping them in and out cause stress marks on mine. I circled where on the pic (the pic isn't mine it's just for reference). There's also stress marks on the front car panels for some reason.

There's just so much wrong with this figure. I wanted Road Rage but am now reconsidering.

Kingdom-Deluxe-Tracks-01-e1620748930807.png

It's definitely over-engineered and disappointing, but are stress marks really a deal-breaker? I'm at the point where I'm pretty much okay with anything short of outright breakage, and I don't have an assumption that they're going to remain completely intact forever.

I was just watching a youtube review and his copy has stress marks in the same spot so I know it's just not my copy.


The stress marks, on their own wouldn't be, but people are right about the other issues the figure has.

The clear plastic + tight tabbing required makes him seem very fragile
The crappy legs that have loose joints, and just come apart, and are needlessly complicated to transform, AND have the product code right on the front where you can't miss it.
Heck, even the arms have clearance issues because the wheels hit the chest.

All of these seem like minor thing but such a large collection of them make me wonder how rushed this mold was. Was there any quality testing after he was finished?

Overcracker wrote:

RiddlerJ wrote:

AcademyofDrX wrote:

RiddlerJ wrote:

Overcracker wrote:

RiddlerJ wrote:For some of you that have had Tracks for a while now, is he still holding together or flying apart as many people have feared.

I finally picked him up an am terrified of doing anything with him, given how tight the transparent plastic has to tab together. Not to mention, I transformed him once and already see stress marks on parts of him.

I have a stress mark on the windshield roof from tabbing and untabbing from the hood hooks.

Stressmark_Tracks.jpg

Outside ion that and the tiny stress mark on the pin holding the leg panel in he's fine.

That windshield roof tab terrifies me. It has to clip in so tight.

But one thing that I haven't read about is that the transformation joints on Tracks shoulders are so tight that flipping them in and out cause stress marks on mine. I circled where on the pic (the pic isn't mine it's just for reference). There's also stress marks on the front car panels for some reason.

There's just so much wrong with this figure. I wanted Road Rage but am now reconsidering.

Kingdom-Deluxe-Tracks-01-e1620748930807.png

It's definitely over-engineered and disappointing, but are stress marks really a deal-breaker? I'm at the point where I'm pretty much okay with anything short of outright breakage, and I don't have an assumption that they're going to remain completely intact forever.

I was just watching a youtube review and his copy has stress marks in the same spot so I know it's just not my copy.


The stress marks, on their own wouldn't be, but people are right about the other issues the figure has.

The clear plastic + tight tabbing required makes him seem very fragile
The crappy legs that have loose joints, and just come apart, and are needlessly complicated to transform, AND have the product code right on the front where you can't miss it.
Heck, even the arms have clearance issues because the wheels hit the chest.

All of these seem like minor thing but such a large collection of them make me wonder how rushed this mold was. Was there any quality testing after he was finished?

There leg panels at least can be fixed. They won't be 100% solidly tabbed in because the tabs are just too shallow for any sort of purchase, but at least they stay in place better.

The windshield slot is super tight and I'm not sure I want to keep transforming him just because of that.

I have no stress marks on the chest hinges nor do the tires actually hit the chest, I can rotate them 360 degrees just fine.

Lore Keeper wrote:

o.supreme wrote:Apparently wave 4 deluxes have now been spotted at U.S. retail (personally I haven't even seen wave 3 at stores yet despite getting them online weeks ago)

https://www.allspark.com/us-retail-sigh ... -in-texas/

Lore Keeper wrote:Has anybody's Waspinator and Shadow Panther shipped yet? It's been four days now.

??? Where did you pre-order from, there are no sites I am aware of that have official pre-orders available, which is what makes the instore sighting both intriguing, but also frustrating.

There's a website called Toy Snowman. They had a news alert about it here a few days ago. Be warned, if you live in the US, you'll pay a LOT more for it.

Rodimus Prime wrote:My Tracks is still MISB, reading all these posts is scaring me about handling him...

Do I get Kingdom Waspinator, or do I overpay for the more accurate T30 version?

-Kanrabat- wrote:

Rodimus Prime wrote:My Tracks is still MISB, reading all these posts is scaring me about handling him...

Do I get Kingdom Waspinator, or do I overpay for the more accurate T30 version?

If you want T-30 Waspinator I can go to my local Geek Stuff. Used and complete for the price of a regular deluxe. I'll just give him a ride along Megs.

If you can find either of them to trade, you'd get yourself a deal:
SS86 Gnaw
Kingdom Scorponok
Kingdom Waspinator
SS Barricade
If you cant have any of them, list me a few deluxes you can offer.

Rodimus Prime wrote:

-Kanrabat- wrote:

Rodimus Prime wrote:My Tracks is still MISB, reading all these posts is scaring me about handling him...

Do I get Kingdom Waspinator, or do I overpay for the more accurate T30 version?

If you want T-30 Waspinator I can go to my local Geek Stuff. Used and complete for the price of a regular deluxe. I'll just give him a ride along Megs.

If you can find either of them to trade, you'd get yourself a deal:
SS86 Gnaw
Kingdom Scorponok
Kingdom Waspinator
SS Barricade
If you cant have any of them, list me a few deluxes you can offer.

A PM will be sent in short order.

Razorbeast88 wrote:Got notice from Amazon that my Grimlock and Mirage two pack should be arriving on Tuesday

AcademyofDrX wrote:Less exciting than the Slammer news, but Red Alert is back up at Pulse for anyone who missed him originally.

Razorbeast88 wrote:

AcademyofDrX wrote:Less exciting than the Slammer news, but Red Alert is back up at Pulse for anyone who missed him originally.

Yup yup yup and Gigawatt as well

blackeyedprime wrote:Not much point in the stolen toy slammer review if he doesn't know how it transforms into tower mode/connectivity with metroplex

-Kanrabat- wrote:Transformable 3D printed feet for Kingdom Core Soundwave.
Expensive, but a must.

IMG_20210917_174857.jpg

primalxconvoy wrote:

-Kanrabat- wrote:Transformable 3D printed feet for Kingdom Core Soundwave.
Expensive, but a must.

IMG_20210917_174857.jpg

Now, we need a KO company to oversize the whole thing and sell it for pennies.

AcademyofDrX wrote:

primalxconvoy wrote:

-Kanrabat- wrote:Transformable 3D printed feet for Kingdom Core Soundwave.
Expensive, but a must.

IMG_20210917_174857.jpg

Now, we need a KO company to oversize the whole thing and sell it for pennies.

We don't need either of these things. It's perfectly fine for a $10 toy, and the Netflix Soundwave is better than an oversized version of the Core class figure it inspired.

(For anyone who doesn't have the Netflix Soundwave, I'm sorry.)

AcademyofDrX wrote:

primalxconvoy wrote:

-Kanrabat- wrote:Transformable 3D printed feet for Kingdom Core Soundwave.
Expensive, but a must.

IMG_20210917_174857.jpg

Now, we need a KO company to oversize the whole thing and sell it for pennies.

We don't need either of these things. It's perfectly fine for a $10 toy, and the Netflix Soundwave is better than an oversized version of the Core class figure it inspired.

(For anyone who doesn't have the Netflix Soundwave, I'm sorry.)

AcademyofDrX wrote:

primalxconvoy wrote:

-Kanrabat- wrote:Transformable 3D printed feet for Kingdom Core Soundwave.
Expensive, but a must.

IMG_20210917_174857.jpg

Now, we need a KO company to oversize the whole thing and sell it for pennies.

We don't need either of these things. It's perfectly fine for a $10 toy, and the Netflix Soundwave is better than an oversized version of the Core class figure it inspired.

(For anyone who doesn't have the Netflix Soundwave, I'm sorry.)

Sabrblade wrote:Besides, Netflix Soundwave is already rumored to be getting rereleased in Legacy.