Unicron will Come with Tiny Galvatron and Interchangeable Chin

Man, they would make that Galvatron look like the TR one.

Also, YES!!!! BEEEEEEEEEEEEEARD!!!!!!!!!!!

I'm still not willing to use an unsecure website like TFExpress, next best bet is toypanic.com £483 but will have p&P at unknown costs from malaysia and likely customs.

The Galvatrons neat but it just shows how badly unicron scales with anything even in the movie (compared to the size of a spaceship crashing through his eye)

Yet we still don't have a masterpiece version of Galvy.

cruizerdave wrote:Yet we still don't have a masterpiece version of Galvy.

What does that have to do with any of this?

Sabrblade wrote:

cruizerdave wrote:Yet we still don't have a masterpiece version of Galvy.

What does that have to do with any of this?

My thoughts exactly.



I wish this was a more movie accurate piece. I wonder if they just printed the easiest-to-find model they had, i.e. TR Galvatron, but plan to provide a more G1 inspired one with the final product...

cruizerdave wrote:Yet we still don't have a masterpiece version of Galvy.

Yet two reasonable third party ones to choose from, unlike Unicron (yet...)

I wasn't really hung up on the lack of a beard when they first revealed Unicron. But seeing him with it now, he looks so much better! This just pushed me much closer to taking the plunge!

Christ, now they do the goatee. They should’ve revealed everything from the get-go instead of trickling it out as the days go by. See now I’m on board, but dammit I can’t afford it in four days. The Army only pays me so much

Mindmaster wrote:Christ, now they do the goatee. They should’ve revealed everything from the get-go instead of trickling it out as the days go by. See now I’m on board, but dammit I can’t afford it in four days. The Army only pays me so much

Go for one of the other options that lets you instead save up until 2021, with only a $150 down payment instead of $600.

Yesssssssssssssss! I don't know why that wasn't the default chin. Maybe they whipped it up to drum up more support? Regardless I'm really happy they made it.

Seeing that Galvy makes me wish they had made him during the days when World's Smallest Transformers were a thing. But it's not the first time I wished for that,

Looking at Galvatron again, I'm pretty sure he's too big. 1 inch is probably still too big, but I'd prefer that.

megatronus wrote:Looking at Galvatron again, I'm pretty sure he's too big. 1 inch is probably still too big, but I'd prefer that.

Eh, the scene with him getting swallowed by Unicron had him out of scale anyway. They made him too big so that he could be more visible onscreen, so this toy being too big reflects that. Otherwise, this mini-Galvatron would have to be smaller than an ant to be correct-scaled.

Sabrblade wrote:

megatronus wrote:Looking at Galvatron again, I'm pretty sure he's too big. 1 inch is probably still too big, but I'd prefer that.

Eh, the scene with him getting swallowed by Unicron had him out of scale anyway. They made him too big so that he could be more visible onscreen, so this toy being too big reflects that. Otherwise, this mini-Galvatron would have to be smaller than an ant to be correct-scaled.

Well yea, but even at an inch he's way out of scale. Unless the figure was at maximum half a centimeter the scaling wouldn't work. But I'd like to get slightly closer to the ideal.

if they make that galvatron a "Legion class" I will pre-order

I know it's sacrilege and all, but there is a 3rd party Legends sized Galvatron if you must have a small Galvatron to go with your massive Unicron. He's a bit too big for this scene, I think, but he exists.

Galvatron was even smaller than that in the movie, not that I'm quibbling. I just don't have 400 smackers to get this thing.

sol magnus wrote:Galvatron was even smaller than that in the movie, not that I'm quibbling. I just don't have 400 smackers to get this thing.

Like I said before, Galvatron was already out of scale in the movie scene where he gets swallowed by Unicron. For this mini-Galvatron to be correctly-scaled, it'd have to be smaller than an ant.

Sabrblade wrote:

sol magnus wrote:Galvatron was even smaller than that in the movie, not that I'm quibbling. I just don't have 400 smackers to get this thing.

Like I said before, Galvatron was already out of scale in the movie scene where he gets swallowed by Unicron. For this mini-Galvatron to be correctly-scaled, it'd have to be smaller than an ant.

Yeah...I responded to the post on the main page, only to find the discussion had been going on for quite a few posts.

NOM NOM NOM!!

yeah scale cant really be achieved with Unicron because he is so massive. The closest would be to take a Titan Master and place it on his surface and *pretend* it was Metroplex or Fort Max, but even that wouldn't be quite right.

joevill wrote:NOM NOM NOM!!

Last week reveal: Unicron comes with the blue plush costume they fabricated for Cookie Monster!

blackeyedprime wrote:I'm still not willing to use an unsecure website like TFExpress, next best bet is toypanic.com £483 but will have p&P at unknown costs from malaysia and likely customs.

The Galvatrons neat but it just shows how badly unicron scales with anything even in the movie (compared to the size of a spaceship crashing through his eye)

Yeah I hear you that's why I used PayPal to get some protection.

What I want, is a removable eye piece that can be replaced with one that has the Quintison ship going into it.

Honestly, I think this covers most of my issues with the figure AND the various looks/scenes I'd want to achieve. Chin, face swap, eye damage, etc. They've nailed it.

If there are any other reveals, I hope they may have to do with inside functionality.

I'd love it if there were an area you could reveal an area with moving pistons and pipes (when he is energized from eating a planet) — OR especially the inside command center with all the TV screens.

It seems like — since the toy has to be hollow — that they could spend some effort to detail and exploit some hollow areas to give a not to those scenes (and jump start our imaginations.)

Acid Pit!
Acid Pit!
Acid Pit!

that Galvatron is bad comedy

Since there is a like a year to release, I'm guessing this Galvatron is just a placeholder.

I also thought of the acid pit, but I think it would be third on my list under the other two interior gimmicks I mentioned.

(Mostly, because it would be impossible to scale any figures to drop into the acid. It's not like you could pull out your G1 /WST Bee or Cliffjumper to put in the acid. Too big.

The other two gimmicks — brain, pistons — would look great and function without extra figures.)

Mind you I DO still want it... just as third on my list. Maybe they can work to represent all three, since much of it would simply be molded in the recesses of the figure. (There seriously has to be some monstrous cavities inside that guy's torso, stomach, back, legs — so who knows.)

Thinking about this, I guess I'd shoot for back of head or upper torso for brain cavity, and stomach area for pistons and/or acid pit to represent digestion? I'll have to look at the photos closely and think on this...

not even close

gothsaurus wrote:Thinking about this, I guess I'd shoot for back of head or upper torso for brain cavity, and stomach area for pistons and/or acid pit to represent digestion? I'll have to look at the photos closely and think on this...

Given the head already has the swappable face gimmicks, as well as the articulated eyes, I wouldn't count on them being able to pack anything else in there. I could be wrong, though.

What's not even close? ... the acid pit? My ideas? The number of backers out of 8000?

gothsaurus wrote:What's not even close? ... the acid pit? My ideas? The number of backers out of 8000?

backers

Yeah, I'm hoping they have a backup plan... extend the deadline or push it back a few months with a big heads-up that they are re-doing it. Or simply fudge it if they are really close... like 7000+.

Or maybe Hasbro could swoop in to chip in some of the dough? Who knows, but I still have a little hope. There are a lot more people jumping in in the past week than before. Crossing my fingers.

gothsaurus wrote:Yeah, I'm hoping they have a backup plan... extend the deadline or push it back a few months with a big heads-up that they are re-doing it. Or simply fudge it if they are really close... like 7000+.

Or maybe Hasbro could swoop in to chip in some of the dough? Who knows, but I still have a little hope. There are a lot more people jumping in in the past week than before. Crossing my fingers.

Remember: they added 1500 in affiliate orders, but it was unclear whether that included TakaraTomy Mall, US retailers, or both. In any case, it appears there's still a large chunk of international orders that have not yet been counted, and the inevitable last day spike.

I'm very hopeful.

I think there's still some to be added from the third party sites that aren't affiliated with hasbro.

I wouldn't hold out much hope for molded detail within unicron as all those bot pieces have to go somewhere and as such everything will be measured to fit, molded details may get in the way of Transformation mechanisms.

I'm more talking about the underside of the flat pieces — like the inside of Metroplex's legs. Those areas have to be there, and adding sculpting doesn't get in the way of transformation or add any more complexity to the figure, weight, etc.

megatronus wrote:

gothsaurus wrote:Yeah, I'm hoping they have a backup plan... extend the deadline or push it back a few months with a big heads-up that they are re-doing it. Or simply fudge it if they are really close... like 7000+.

Or maybe Hasbro could swoop in to chip in some of the dough? Who knows, but I still have a little hope. There are a lot more people jumping in in the past week than before. Crossing my fingers.

Remember: they added 1500 in affiliate orders, but it was unclear whether that included TakaraTomy Mall, US retailers, or both. In any case, it appears there's still a large chunk of international orders that have not yet been counted, and the inevitable last day spike.

I'm very hopeful.

And you stay hopeful you positive sunvaglitch. It’ll happen and it’ll be awesome. I’ve just got this feeling...

The way things are going we'll be at 5,000 within the next couple hours, currently at 4,965. Things are really moving at a steady pace. 3,000 worldwide in the next four days should be doable.

Emerje

Out of curiousity how many stores have preorders?

As a heads up for anyone who preordered through TFSource back before they updated their policy to include a $150 down payment, I just got an email from them yesterday about my deposit being due by 8/30, so if you haven't gotten a notification from them yet, you should be getting one very soon.

I'm nearly all set to make the payment via PayPal, just waiting for my next paycheck notice before I do. And if TFSource's deadline is 8/30, then that must mean they're getting ready to submit all of their numbers to Hasbro on either 8/30 or 8/31.

Sabrblade wrote:As a heads up for anyone who preordered through TFSource back before they updated their policy to include a $150 down payment, I just got an email from them yesterday about my deposit being due by 8/30, so if you haven't gotten a notification from them yet, you should be getting one very soon.

I'm nearly all set to make the payment via PayPal, just waiting for my next paycheck notice before I do. And if TFSource's deadline is 8/30, then that must mean they're getting ready to submit all of their numbers to Hasbro on either 8/30 or 8/31.

Damn... I was really hoping i had gotten away with not paying.

and I won't be able to pay until Monday night anyway because I will be away.

Also, this from Twitter:

Why does Hasbro insist on making Unicron that sickly yellow orange when he has ALWAYS been a very saturated orange?

Quick question about using TF Source. Will they charge the $150 if it hits 8000 or only if you happen to cancel?

Ravage2031 wrote:Quick question about using TF Source. Will they charge the $150 if it hits 8000 or only if you happen to cancel?

It’s a down payment; if it hits the funding goal and is confirmed moving to production, you’ll get charged.

Ravage2031 wrote:Quick question about using TF Source. Will they charge the $150 if it hits 8000 or only if you happen to cancel?

So what they do is price the big U at $775 or whatever. When you preorder, the will charge your card $150. This counts towards that $775 that will be due in 2021. If Unicron fails, that is the only situation in which you will get that $150 down payment back. If the campaign succeeds, then you only owe TFSource $625 in 2021 when Unicron is released. If you decide you don’t want Unicron after, or can’t save up for it by 2021, even if you cancel, you WILL NOT get that $150 back (that’s the non-refundable part). Hope that helps

Nevermind, see above post for a better answer.

Crosscheck wrote:Why does Hasbro insist on making Unicron that sickly yellow orange when he has ALWAYS been a very saturated orange?

The final product might be a little different as this is a prototype, have hope!

megatronus wrote:Looking at Galvatron again, I'm pretty sure he's too big. 1 inch is probably still too big, but I'd prefer that.

If they made Galvatron to scale, he would be functionally too small, 2mm would be easy to lose.

He’s coming for us...

Triggerdick Megatron wrote:

megatronus wrote:Looking at Galvatron again, I'm pretty sure he's too big. 1 inch is probably still too big, but I'd prefer that.

If they made Galvatron to scale, he would be functionally too small, 2mm would be easy to lose.

1/10 of an inch?

blackeyedprime wrote:

cruizerdave wrote:Yet we still don't have a masterpiece version of Galvy.

Yet two reasonable third party ones to choose from, unlike Unicron (yet...)

Those unofficial products don't count. They're not Transformers products.