Transformers: The Last Knight One Step Changers Sighted in the US

SillyMcGilly wrote:Could the new trailer give us a clue as to why some of the TLK toys have parts-forming? Maybe Bumblebee has the same un-assembling gimmick in his later toy as in the trailer?



If it's the case, that is an awesomely clever way to cheap out on designs!

If he has ball joints then he should go to pieces pretty easily.

Emerje

Can anyone tell me who's the bot beside Barricade??

IAPETUS_PRIME wrote:Can anyone tell me who's the bot beside Barricade??

Where, what picture are you looking at?


Here?



That's Megatron, and Decepticon Berserker.

See i was right, i knew i wasn't imagining it, that there is a TTC packet going about with the letter S on it, mind you i still dunno who the hell it is

I'd heard some rumors about a deluxe Bumblebee variant, so I took a look for myself and yep, there is one. Behold - launch day purchase on the left, today's purchase on the right:



You can see the black paint not only gets onto the roof, but portions of the rear of the vehicle as well.

In robot mode there's no difference that's really noticeable. The shades of yellow are my lighting setup being crappy/me being not great at pictures. Trust me on this, the yellows are the same despite what it might look like here!

However, when it's in the package, the roof pieces are left flat on the back. I've posed these oddly to show you how you can identify the variant in the store. The easiest way is to look at the rear piece, as the black "leaks through" a bit even when viewed from the front. The roof panel itself can be helpful in this but it isn't as reliable.

Given that the assortment codes are the same, I don't know of any other way to identify them while in the store, outside of being a total prick and opening the package in the aisle (do not do this.)

Overcracker wrote:

IAPETUS_PRIME wrote:Can anyone tell me who's the bot beside Barricade??

Where, what picture are you looking at?


Here?



That's Megatron, and Decepticon Berserker.

Not in that pic but in the video ending where Optimus' toy joins the other toys standing.

IAPETUS_PRIME wrote:

Overcracker wrote:

IAPETUS_PRIME wrote:Can anyone tell me who's the bot beside Barricade??

Where, what picture are you looking at?


Here?



That's Megatron, and Decepticon Berserker.

Not in that pic but in the video ending where Optimus' toy joins the other toys standing.

The animated poster?

The toys standing at the end are (in order) Barricade, Slash, Prime, Bumblebee, Grimlock, Berserker. All wave 1 figures. And two of which are in the photo just above too. They're angled in a V sorta shape so the ones on the sides Barry and Berserk, again same as the photo above oddly enough but reversed positions) look much smaller than they are.

Carnivius_Prime wrote:

IAPETUS_PRIME wrote:

Overcracker wrote:

IAPETUS_PRIME wrote:Can anyone tell me who's the bot beside Barricade??

Where, what picture are you looking at?


Here?



That's Megatron, and Decepticon Berserker.

Not in that pic but in the video ending where Optimus' toy joins the other toys standing.

The animated poster?

The toys standing at the end are (in order) Barricade, Slash, Prime, Bumblebee, Grimlock, Berserker. All wave 1 figures. And two of which are in the photo just above too. They're angled in a V sorta shape so the ones on the sides Barry and Berserk, again same as the photo above oddly enough but reversed positions) look much smaller than they are.

thanks i kinda thought slash looked like grimlock.

Found this on facebook, voyager scorn in packaging.

unfortunately there is no picture of the back side yet.

bacem wrote:Found this on facebook, voyager scorn in packaging.

FB_IMG_1495171649788.jpg

unfortunately there is no picture of the back side yet.

He looks meaty! :O

Fellow Seibertronian bacem has pointed us towards a new image of in-package Voyager Scorn from the Transformers: The Last Knight Premier Edition toy line - courtesy of the usual Weibo account - and we've mirrored it below for your viewing! Check it out, and let us know what you think of this upscaled dinobot so far!

Just pointing out that Scorn is a DELUXE.

...
Unless they made an upscaled version just for TLK?
Naaaaah...

-Kanrabat- wrote:Just pointing out that Scorn is a DELUXE.

...
Unless they made an upscaled version just for TLK?
Naaaaah...

no, this scorn is a voyager


that pic is taken at toyfair. As you can see, he is bigger than deluxe steelbane on the right.

And yes, this is a new mold for TLK

bacem wrote:
no, this scorn is a voyager

And yes, this is a new mold for TLK

Oh?
OOOOOOOOOOOOOooooooooooooooooooooohhhhhhhhhhhhhhhhh..................

Well well well, a (somewhat) NEW dinobot!
Deluxe Scorn is a great mold. So I expect the new voyager to be amazing. Nevertheless, it's an unexpected want!

Seibertronian podcaster and database master ScottyP has been helping us validate some rumours about the deluxe Premier Edition Transformers: The Last Knight Bumblebee figure: apparently, there are two versions of the toy, one with yellow, one with black (cue Childish Gambino homage). Check out the rundown below!

ScottyP wrote:I'd heard some rumors about a deluxe Bumblebee variant, so I took a look for myself and yep, there is one. Behold - launch day purchase on the left, today's purchase on the right:



You can see the black paint not only gets onto the roof, but portions of the rear of the vehicle as well.

In robot mode there's no difference that's really noticeable. The shades of yellow are my lighting setup being crappy/me being not great at pictures. Trust me on this, the yellows are the same despite what it might look like here!

However, when it's in the package, the roof pieces are left flat on the back. I've posed these oddly to show you how you can identify the variant in the store. The easiest way is to look at the rear piece, as the black "leaks through" a bit even when viewed from the front. The roof panel itself can be helpful in this but it isn't as reliable.

Given that the assortment codes are the same, I don't know of any other way to identify them while in the store, outside of being a total prick and opening the package in the aisle (do not do this.)

Now why couldn't the paint have been added to the robot mode

D-Maximus_Prime wrote:Now why couldn't the paint have been added to the robot mode

Now why couldn't they have skipped the repaint and just release the brand new Deluxe in wave 1?

Carnivius_Prime wrote:

D-Maximus_Prime wrote:Now why couldn't the paint have been added to the robot mode

Now why couldn't they have skipped the repaint and just release the brand new Deluxe in wave 1?

And made Hot Rod a wave 3 deluxe? That is a question no one can answer

And because of the extra paint, this is now $39.99. The Primeirier Edition.

omega666 wrote:And because of the extra paint, this is now $39.99. The Primeirier Edition.

Haha! +1 Zing!!

Just a small tip for variant identification. Shine a phone light into the package while having the phone cover the least amount of clear plastic as possible. That's how I got good paint applications on CW deluxes.

Terrsolpix wrote:Just a small tip for variant identification. Shine a phone light into the package while having the phone cover the least amount of clear plastic as possible. That's how I got good paint applications on CW deluxes.

If I did that, would I expect weird looks from the shop assistants like when I went through the 30 or so Tiny Turbo Changers they had on the pegs yesterday searching for Prime and Grimlock? I put all the unbought ones back on the pegs like a good tidy person though.

Carnivius_Prime wrote:

Terrsolpix wrote:Just a small tip for variant identification. Shine a phone light into the package while having the phone cover the least amount of clear plastic as possible. That's how I got good paint applications on CW deluxes.

If I did that, would I expect weird looks from the shop assistants like when I went through the 30 or so Tiny Turbo Changers they had on the pegs yesterday searching for Prime and Grimlock? I put all the unbought ones back on the pegs like a good tidy person though.

does molesting blind bags still counts as weird on US retails?

Carnivius_Prime wrote:

Terrsolpix wrote:Just a small tip for variant identification. Shine a phone light into the package while having the phone cover the least amount of clear plastic as possible. That's how I got good paint applications on CW deluxes.

If I did that, would I expect weird looks from the shop assistants like when I went through the 30 or so Tiny Turbo Changers they had on the pegs yesterday searching for Prime and Grimlock? I put all the unbought ones back on the pegs like a good tidy person though.

Tiny Turbos have a code on the back that just needs to be held up to the dimmest store light. Glad to see someone who also repegs them instead of throwing them in a box of the RID ones.

Terrsolpix wrote:

Carnivius_Prime wrote:

Terrsolpix wrote:Just a small tip for variant identification. Shine a phone light into the package while having the phone cover the least amount of clear plastic as possible. That's how I got good paint applications on CW deluxes.

If I did that, would I expect weird looks from the shop assistants like when I went through the 30 or so Tiny Turbo Changers they had on the pegs yesterday searching for Prime and Grimlock? I put all the unbought ones back on the pegs like a good tidy person though.

Tiny Turbos have a code on the back that just needs to be held up to the dimmest store light. Glad to see someone who also repegs them instead of throwing them in a box of the RID ones.

I was using that list but those letters are kinda embossed and very small and it's hard to get the right kind of light to make out the exact shape of the letter so it took a while and i had my phone perched up ontop on the shelf below displaying the list.

bacem wrote:

Carnivius_Prime wrote:

Terrsolpix wrote:Just a small tip for variant identification. Shine a phone light into the package while having the phone cover the least amount of clear plastic as possible. That's how I got good paint applications on CW deluxes.

If I did that, would I expect weird looks from the shop assistants like when I went through the 30 or so Tiny Turbo Changers they had on the pegs yesterday searching for Prime and Grimlock? I put all the unbought ones back on the pegs like a good tidy person though.

does molesting blind bags still counts as weird on US retails?

Is not as bad ever since the Lego minifigure blind bags. I collect them and nobody bats an eye, mostly because I get them from an official store since it's cheaper that way. Also, Tiny Turbos tend to get bent in bag if too much force is applied.

D-Maximus_Prime wrote:

Carnivius_Prime wrote:

D-Maximus_Prime wrote:Now why couldn't the paint have been added to the robot mode

Now why couldn't they have skipped the repaint and just release the brand new Deluxe in wave 1?

And made Hot Rod a wave 3 deluxe? That is a question no one can answer

and take out all the dinobots but scorn, because theres no reason for them to be there

bacem wrote:does molesting blind bags still counts as weird on US retails?

I was in canada doing the same and I felt pretty weird. But I found my Soundwave!

Bumblebee21 wrote:and take out all the dinobots but scorn, because theres no reason for them to be there

I dunno about Grimlock. The voyager toy is still very good and now in a more accurate paintjob easy available in regular stores and he does appear a lot in the trailers so likely a key character in the film so if missed out on the AoE release which obviously isn't in shops now (and was only sold in Toys R Us here in the UK back then) then I can understand the redecoed re-release there. Just the price hike on it is the annoying bit.

Carnivius_Prime wrote:

Bumblebee21 wrote:and take out all the dinobots but scorn, because theres no reason for them to be there

I dunno about Grimlock. The voyager toy is still very good and now in a more accurate paintjob easy available in regular stores and he does appear a lot in the trailers so likely a key character in the film so if missed out on the AoE release which obviously isn't in shops now (and was only sold in Toys R Us here in the UK back then) then I can understand the redecoed re-release there. Just the price hike on it is the annoying bit.

i hate the mold. and its not selling either. went to a tru and saw 14 of him.

Bumblebee21 wrote:i hate the mold. and its not selling either. went to a tru and saw 14 of him.

You hate it? I love it. I think it's a great figure and one of the best toys for any Dinobot ever and looks cool in both modes. I still have my AoE version and am just waiting for the TLK one to get price reduced.

Bumblebee21 wrote:

D-Maximus_Prime wrote:

Carnivius_Prime wrote:

D-Maximus_Prime wrote:Now why couldn't the paint have been added to the robot mode

Now why couldn't they have skipped the repaint and just release the brand new Deluxe in wave 1?

And made Hot Rod a wave 3 deluxe? That is a question no one can answer

and take out all the dinobots but scorn, because theres no reason for them to be there

Theres a great reason: the molds already exist. They are an easy way to beef up a toyline without increasing the development cost.

william-james88 wrote:

Bumblebee21 wrote:

D-Maximus_Prime wrote:

Carnivius_Prime wrote:

D-Maximus_Prime wrote:Now why couldn't the paint have been added to the robot mode

Now why couldn't they have skipped the repaint and just release the brand new Deluxe in wave 1?

And made Hot Rod a wave 3 deluxe? That is a question no one can answer

and take out all the dinobots but scorn, because theres no reason for them to be there

Theres a great reason: the molds already exist. They are an easy way to beef up a toyline without increasing the development cost.

that space couldve gone to new characters we arent gonna get from the movie

Bumblebee21 wrote:that space couldve gone to new characters we arent gonna get from the movie

Not if the budget doesnt allow it. We have no clue if it could have or not, the sacrifices that we made, and so on. For instance we know that the only reason Combiner Wars was even a thing was because John Warden showed Hasbro how a bunch of characters could be obtained from small amount of molds and designs and thats why it was greenlit.

The only thing I feel confident in bitching about would be things like having different paint apps on Voyager Optimus. So a reorientation of the budget.

But saying we would like new toys instead of repaints is an old duscussion that has already been talked to death.

The truth is, if the space didnt go to repaints, it would have gone to no one.

Carnivius_Prime wrote:

Bumblebee21 wrote:i hate the mold. and its not selling either. went to a tru and saw 14 of him.

You hate it? I love it. I think it's a great figure and one of the best toys for any Dinobot ever and looks cool in both modes. I still have my AoE version and am just waiting for the TLK one to get price reduced.

Spoilers, that voyager Grimlock is on my upcoming top 5 list of best grimlock toys

william-james88 wrote:
Spoilers, that voyager Grimlock is on my upcoming top 5 list of best grimlock toys

Grimlock pleased!

ScottyP wrote:I'd heard some rumors about a deluxe Bumblebee variant, so I took a look for myself and yep, there is one. Behold - launch day purchase on the left, today's purchase on the right:



You can see the black paint not only gets onto the roof, but portions of the rear of the vehicle as well.

In robot mode there's no difference that's really noticeable. The shades of yellow are my lighting setup being crappy/me being not great at pictures. Trust me on this, the yellows are the same despite what it might look like here!

However, when it's in the package, the roof pieces are left flat on the back. I've posed these oddly to show you how you can identify the variant in the store. The easiest way is to look at the rear piece, as the black "leaks through" a bit even when viewed from the front. The roof panel itself can be helpful in this but it isn't as reliable.

Given that the assortment codes are the same, I don't know of any other way to identify them while in the store, outside of being a total prick and opening the package in the aisle (do not do this.)

What about the imprinted codes on the box?

If anyone's interested, there's TLK Grimlocks and Primes in the Toy Barnhaus in Horsham. Well, there were last time I checked anyway.

This toy looks so terrible. AND for all that money. I can't understand why they are trying to market such a low quality figure in this line. The movie lines are supposedly family oriented. But lets face it: the movies themselves are more focused towards an older generation of fans. We are not going to want a crumb of plastic whose knees don't even bend for ~$40. HasTak needs to get there shit together for this line. It's getting ridiculous.

So far none of the movie toys barring the Tiny Turbo Chargers have interested me. Thanks to the window and the list I got all 5 I wanted plus blackout who I got before I knew about the window and list and all for less than the price of one movie deluxe

Hanzako wrote:We are not going to want a crumb of plastic whose knees don't even bend for ~$40.

Which figure are you talking about 'whose knees don't even bend'? :O

Carnivius_Prime wrote:

D-Maximus_Prime wrote:Now why couldn't the paint have been added to the robot mode

Now why couldn't they have skipped the repaint and just release the brand new Deluxe in wave 1?

I wish they'd have skipped the repaints all together and given us a line of new moulds with more than three main line Decepticons.

Hanzako wrote: the movies themselves are more focused towards an older generation of fans.

Which is odd since the older TF fans hate the films.

TFmonkeybiz wrote:I wish they'd have skipped the repaints all together and given us a line of new moulds with more than three main line Decepticons.

The wishing gate opens into nothing.
- Charles Haddon Spurgeon

TFmonkeybiz wrote:

Carnivius_Prime wrote:

D-Maximus_Prime wrote:Now why couldn't the paint have been added to the robot mode

Now why couldn't they have skipped the repaint and just release the brand new Deluxe in wave 1?

I wish they'd have skipped the repaints all together and given us a line of new moulds with more than three main line Decepticons.

Bumblebee's the only repaint that makes no sense to me since it's not even trying for movie accuracy unlike the Dinobots and has a brand new awesome looking figure being released later. Crosshairs and Drift looked like redecos at first but they're retooled. Barricade, Megatron, Hound, Sqweeks, Berserker, Steelbane, Scorn, Prime and new Bee are all new molds and those are all the known proper 'Generations' type TLK figures we know of so far. Certainly not been as repaint heavy as certain other TF lines yet.

(yeah I forgot the Leader Class figures cos their price and overly large size has me ignoring them anyways... Prime is old, Megatron is new)

Carnivius_Prime wrote:
Bumblebee's the only repaint that makes no sense to me since it's not even trying for movie accuracy unlike the Dinobots and has a brand new awesome looking figure being released later.

It is the oddest choice, especially when Bee is reverting to an older body, and there are many other toys out there with a body looking more along the lines of that than the AOE mold.

Directly from Hasbro, check out the Transformers: The Last Knight Turbo Changer Knight Armor advert on their official YouTube channel! Featuring the first wave of Grimlock, Bumblebee and Optimus Prime, the clip has been embedded below - though more can be found in our news section, including Hound and Megatron!

I expect that Bee will start the Movie with his new Body - but it might have been nice to show him reformatting himself - you can really tell they don't plan these Movies out as much as they claim - as if they did - then Bee would have gotten an Upgrade in appearance this Movie not the last one - and perhaps they should have stuck with the 1960's Body for all of the last Movie.

I wonder if Bee had that 1960's Body before only with out the Carbon Fibre bits - and he was just revisiting it - like is implied that Optimus is re-visiting his old body too when he adopts the Knightly look.

So I wonder did they come up with the idea for both movies and then just carry on making them or did they make the knightly look for AOE - give it to some character and then when people mostly liked it - they decided to make the the entire theme of the next Movie.

leokearon wrote:So far none of the movie toys barring the Tiny Turbo Chargers have interested me. Thanks to the window and the list I got all 5 I wanted plus blackout who I got before I knew about the window and list and all for less than the price of one movie deluxe

I miss the love for legion class they put on RotF... Pass on this too

william-james88 wrote:

Carnivius_Prime wrote:
Bumblebee's the only repaint that makes no sense to me since it's not even trying for movie accuracy unlike the Dinobots and has a brand new awesome looking figure being released later.

It is the oddest choice, especially when Bee is reverting to an older body, and there are many other toys out there with a body looking more along the lines of that than the AOE mold.

Can any of the molds from the first trilogy even be used, Legions aside? O wait, never mind, that DotM Voyager Prime redeco.

william-james88 wrote:

Carnivius_Prime wrote:
Bumblebee's the only repaint that makes no sense to me since it's not even trying for movie accuracy unlike the Dinobots and has a brand new awesome looking figure being released later.

It is the oddest choice, especially when Bee is reverting to an older body, and there are many other toys out there with a body looking more along the lines of that than the AOE mold.

Maybe it was the most readily available of the preexisting Deluxe class Movieverse Bumblebee molds.