Prime 1 Studio Teases Statue of "Jetfire Optimus" from Transformers: Revenge of the Fallen

Now there's a crotch I'd know anywhere.

I'd buy it if I were rich.

Crotchtimus? Is that you?

I'm just now noticing that Movie Optimus' crotch makes a funny little face. Thanks Prime 1 Studio, for helping me to reach this great epiphany.

Qwan wrote:I'm just now noticing that Movie Optimus' crotch makes a funny little face. Thanks Prime 1 Studio, for helping me to reach this great epiphany.

MY GOD!! Cannot be unseen!

They'd have to do one heckuvva job to make up for the hot mess that the toy version of Optimus/Jetfire was....

Qwan wrote:I'm just now noticing that Movie Optimus' crotch makes a funny little face. Thanks Prime 1 Studio, for helping me to reach this great epiphany.

Not quite as funny as Mr. Elephant on the original 2007 figure's belt buckle.


Emerje

A new update comes our way from Prime 1 Studio, the licensed makers of high-end statues featuring Transformers characters in a range of different styles of aesthetics - specifically today, the Museum Masterline Transformers Movie (live-action) MMTFM-20 Bumblebee, modelled after his latest iteration in the Paramount series, Transformers: The Last Knight!

You can check out below a selection of the images released, as well as a description of the figure and its accessories and features, and head here for even more to look at.

"I-I am Bumblebee, your oldest friend. Optimus. I would lay down my life for you." Prime 1 Studio is proud to present MMTFM-20: Bumblebee from The Transformers: The Last Knight. Bumblebee is one of Optimus Prime's most trusted lieutenants. Although he is not the strongest or most powerful of the Autobots, Bumblebee more than makes up for this with a bottomless well of luck, determination and bravery. He would gladly give his life to protect others and stop the Decepticons. This is a must have for all Transformers fans. Statue features: - Size approximately with Cannon [H:64.2cm W:55.7cm D:46.3cm] - LED functions on eyes, cannon & chest - One (1) alternate Unmasked portrait - One (1) alternate Battle Mask portrait - One (1) interchangeable Right-arm Cannon - One (1) interchangeable Right & Left arm with fist - One (1) Cybertronian Hammer (In the exclusive version only) - One (1) interchangeable Right & Left hand holding Hammer (In the exclusive version only) - Size approximately with Hammer [H:64.2cm W:52.6cm D:48.7cm] (For exclusive version only) Retail Price: - Regular Version: $1449 US - Exclusive Version: $1499 US Edition Size: - Regular Version: TBA - Exclusive Version: 500 Prototype samples shown. Product details could be subjected to change without further notice.

there nice but not for price to high for that price you can put it towards car

$1500 ??? I could put a down payment on a real 2007 Camaro get the **** outta here lol. Why would anyone even buy this when the new MP movie bee costs under $100? (and it transforms) Is there like some small country in Asia where people love transformers but hate transforming them? Who buys these these damn statues?

Rated X wrote:$1500 ??? I could put a down payment on a real 2007 Camaro get the **** outta here lol. Why would anyone even buy this when the new MP movie bee costs under $100? (and it transforms) Is there like some small country in Asia where people love transformers but hate transforming them? Who buys these these damn statues?

Adult collectors who see statues as real display pieces worthy of purchase and toys as dumb children's playthings, who don't want to waste their time "playing" with childish things.

This sad mindset has been around for far longer than Transformers has existed.

Man, that is beautiful. Not paying $1500 obviously, but at least I have an awesome new phone wallpaper!

Sabrblade wrote:

Rated X wrote:$1500 ??? I could put a down payment on a real 2007 Camaro get the **** outta here lol. Why would anyone even buy this when the new MP movie bee costs under $100? (and it transforms) Is there like some small country in Asia where people love transformers but hate transforming them? Who buys these these damn statues?

Adult collectors who see statues as real display pieces worthy of purchase and toys as dumb children's playthings, who don't want to waste their time "playing" with childish things.

This sad mindset has been around for far longer than Transformers has existed.

I get what youre saying. But in my opinion that mindset doesnt seem to match the whole point of being a "Transformers" fan. I would totally agree with the "anti-toys" mindset if we were talking movie characters such as star wars, predator, super heroes, mortal kombat, gi-joe, etc. Those characters all make great statues without defeating the purpose of the franchise. But the whole lure behind the transformers franchise is that they can transform which pretty much keeps them stuck in the toy category. But thats a connection that runs deep in the fandom. I find it hard to believe a Transformers fan would hate toys since it kind of goes with the territory. If I was a Terminator fan, I would definitely want an Arnold statue over some dumb action figure. But with Transformers that logic just makes no sense. At least not to me. To me the fact that its a robot, automatically makes it a "toy" whether it transforms or not. It doesnt get away from being less "geeky" just because it doesnt transform. Its a freaking robot and anyone who is ashamed of collecting toys isnt going to have an easier time justifying their robot statue collection to other toy haters lol.

Rated X wrote:

Sabrblade wrote:

Rated X wrote:$1500 ??? I could put a down payment on a real 2007 Camaro get the **** outta here lol. Why would anyone even buy this when the new MP movie bee costs under $100? (and it transforms) Is there like some small country in Asia where people love transformers but hate transforming them? Who buys these these damn statues?

Adult collectors who see statues as real display pieces worthy of purchase and toys as dumb children's playthings, who don't want to waste their time "playing" with childish things.

This sad mindset has been around for far longer than Transformers has existed.

I get what youre saying. But in my opinion that mindset doesnt seem to match the whole point of being a "Transformers" fan. I would totally agree with the "anti-toys" mindset if we were talking movie characters such as star wars, predator, super heroes, mortal kombat, gi-joe, etc. Those characters all make great statues without defeating the purpose of the franchise. But the whole lure behind the transformers franchise is that they can transform which pretty much keeps them stuck in the toy category. But thats a connection that runs deep in the fandom. I find it hard to believe a Transformers fan would hate toys since it kind of goes with the territory. If I was a Terminator fan, I would definitely want an Arnold statue over some dumb action figure. But with Transformers that logic just makes no sense. At least not to me. To me the fact that its a robot, automatically makes it a "toy" whether it transforms or not. It doesnt get away from being less "geeky" just because it doesnt transform. Its a freaking robot and anyone who is ashamed of collecting toys isnt going to have an easier time justifying their robot statue collection to other toy haters lol.

That's just it, though. This mindset applies to those hardcore adult collectors who regularly collect statues and display pieces, not Transformers fans who regularly collect Transformers toys.

Such people are those who collect these things for their being highly-detailed physical representations of pop culture. These aren't the kinds of people who want these primarily because they have an emotional attachment to the characters, but because they have a more superficial attachment to the movies and their mainstream-ness.

Transformers fans tend to have some inner-child emotional connection that compels them get invested in what is primarily a children's toy brand. The tangibility of changing a robot into another thing entirely is enticing to us Transformers fans as adults in the same way it was enticing to us as kids. But those who grew out of that feeling don't share the same tangible endearment of transforming a toy. They don't want to waste their time figuring out how to get a million-step MP from one mode to the other, they just want a pretty display piece to show off in their living room or wherever they put these things. They don't care as much about the mechanics and engineering and the feeling achievement that comes with mastering a complex transformation, they just want something solid and fancy to decorate their room(s) with.

The main demographic buying these aren't diehard Transformers fandom members who buy and play with toys, they're enthusiasts of pop culture statues who exist outside of the core Transformers fandom.

If you think that's a lot of money then here's what $4000 will get you:



That's 4 FEET of fiberglass by the Loyal Subjects.

Emerje

That is a beautiful TLK Bee! Hammer Time!

Am I the only one that Noticed the last we heard of a Prime1 studios onslaught was July of 2017, It's april 8th 2018 and we have heard nothing since its announcement.

Budder Prime wrote:Am I the only one that Noticed the last we heard of a Prime1 studios onslaught was July of 2017, It's april 8th 2018 and we have heard nothing since its announcement.

I was actually thinking about that this weekend too. Who knows what happened. They probably saw the movie and realized Onslaught, whom they probably thought would be a big character and fan favorite since he shared a name with a G1 guy, only showed up, spoke a line, and was decapitated, and scrapped the statue since it would be utterly pointless

D-Maximal_Primal wrote:

Budder Prime wrote:Am I the only one that Noticed the last we heard of a Prime1 studios onslaught was July of 2017, It's april 8th 2018 and we have heard nothing since its announcement.

I was actually thinking about that this weekend too. Who knows what happened. They probably saw the movie and realized Onslaught, whom they probably thought would be a big character and fan favorite since he shared a name with a G1 guy, only showed up, spoke a line, and was decapitated, and scrapped the statue since it would be utterly pointless

Sadly, that's probably what Happened. The Decepticons of the Last knight will probably sit high on the list of wasted potential for years to come. on the Upside, we got a Crowbar figure in the studio series, so a Dreadbot custom is entirely possible.

Fresh from the Prime 1 Studios Facebook page, we have our first look at their officially licensed statue of Jet Power Optimus Prime as depicted in the finale of 2009's Transformers: Revenge of the Fallen!

Here's what they have to say about it, and of course, lots of pictures showing off all the details that makes up this stunning, non-transforming display piece.

"LET'S ROLL." Prime 1 Studio is proud to present MMTFM-21: Jetpower Optimus Prime from The Transformers: Revenge of the Fallen. Transformers (ROTF) is a 2009 science fiction action film. It is the sequel to 2007’s Transformers, as well as the second installment in the live-action Transformers film series. Jetpower Optimus Prime is the upgrade form of Optimus Prime with Jetfire’s parts. In this form, Optimus possess various weapons, including a cannon on his arm, a machine gun, at least one of his swords from his normal mode and both afterburners on his back which can fire massive energy blasts as well.

Statue features: - Size approximately 37 inches tall [H:93.2cm W:72.4cm D:63.3cm] - LED functions on eyes, cannon, afterburners & statue base - One (1) alternate portrait - One (1) interchangeable Right-hand holding The Fallen Spark (In the Exclusive Version Only) - One (1) interchangeable Left-hand holding The Fallen Command Staff (In the Exclusive Version Only) - One (1) The Fallen Head Bust (In the Exclusive Version Only) Retail

Price: - Regular Version: $2999 US - Exclusive Version: $3199 US Edition Size: - Regular Version: TBA - Exclusive Version: 500 Prototype samples shown. Product details could be subjected to change without further notice.

Along with the official images from Prime 1 Studio directly of their Transformers: Revenge of the Fallen highly articulated (and detailed) Jet Power Optimus Prime statue, we also have a first in-person image of the piece - as well as a first look at a Dark of the Moon Sentinel Prime too!

Twitter user Chohenken brings us both apparently also from Wonderfest 2018, currently still taking place in Japan, and we've mirrored them below for your viewing convenience. Check them out, and let us know what you make of these pricey, sizeable display pieces - all in the Energon Pub discussion forums on Seibertron.com!

THAT is an incredible looking Jet Optimus!

These do show off those gorgeous designs beautifully even if 'just' statues.

In what they called their Sneak Peek of the Day, officially licensed Transformers statue makers Prime 1 Studio have showed off on Instagram the head sculpt for their upcoming Bumblebee figure - this time styled after the new battle mode, complete with battle mask, we've seen in trailers and will see in the Bumblebee Movie come December!

Check out the grey prototype below, with the visor / hive patterned eyes glowing with (sweet baby boy) blue below, and let us know what you think of the Buzz surrounding this new movie and its related merchandise in the Energon Pub discussion boards below!

A double whammy today from Prime 1 Studio, the officially licensed Transformers statue makers, as the Bumblebee Movie hype train has clearly left the Cybertron station - the next sculpt they're teasing on their Facebook page is none other than big bulky bad, possibly triple changing though we have no full confirmation yet, Blitzwing himself, as seen in most of the footage shown in trailers and clips so far from Paramount!

Check out the grey prototype, this time with red optics, below, and let us know what you think in the Energon Pub discussion boards. Who is buying these statues after all?

So I guess blitzwing is relegated to a seeker and his design matches, and since dropkick and shatter are triple changers, maybe he's their triple changing leader?

Theories aside, I love the head design. It's like the "07 Movie G1 Seeker" head mixed with Kold War Scorpion.

Is that a tank tread on the bottom left?

not sure this is the best place to post this, but i have to ask:
why did they make a character who looks dang-near spot-on to g1 starscream, then call him blitzwing? it's not like starscream had a consistent design over the last 10 years, with the movie, prime, RID, and hte cybertron games. why the change?

Short Circuit wrote:So I guess blitzwing is relegated to a seeker and his design matches, and since dropkick and shatter are triple changers, maybe he's their triple changing leader?

Shatter is rumored to be the lead Decepticon of this movie.

The face looks very Blackout-esc to me.

Straxus anyone?

Thanks to the Prime 1 Studio Instagram page straight from Shanghai Comic Con, we have word that their latest statue has been revealed, and it is none other than the main character from the upcoming movie named after him: Bumblebee!

This new statue features movie Bumblebee in all his VW goodness, and includes his new rounder and more cuddly shape. The statue also comes with his newly redesigned arm blaster, and features a stand made out of what appears to be simulated broken concrete, broken pillars, a spare tire, and underneath, a nice metal stand with an Autobot symbol on it. Of note here is that this statue uses the door wings that the movie character himself does not have, though this is has been a consistent design in almost all of his toys in this form, so there's no real surprise there.

Check out the image of the new Prime 1 statue below, and let us know what you think of this guy in the comments section below!

I'm starting to hope that we might see the door wings in the final CG design. It would make sense that they would be there since the robot mode would look more complete with them.

A statue made to be as much 100% movie accurate as possible.

Still got screwed with the door-wings.

I wonder if the door wings will be retractable in the film, kinda like the battle mask?

I should have waited to buy a SS Bumblebee until after they push out a second series of them where the door wings fold onto the back.

I wonder if people will continue to be in denial of the doorwings even after the movie comes out and the door wings most likely appear up-right in a bunch of scenes.

Silverwing wrote:I wonder if the door wings will be retractable in the film, kinda like the battle mask?

I think we saw the wings retract a little when he was trying to get through the door to the house, but I might have been seeing that wrong.

Emerje

He looks better with door wings and they fit his whole Bee thing anyways.

Seibertron's own Nathaniel Prime has directed us towards Prime 1 Studios Facebook who have teased an upcoming Transformers: Bumblebee statue of Optimus Prime. The image originally uploaded to their Facebook page has since been taken down, but we have mirrored it below. Optimus Prime will be joining Prime 1 Studios Blitzwing and Bumblebee in their Bumblebee movie statue range.



With Prime 1 Studio's pricing, this will be a serious investment in anyones Transformers display. How have Prime 1 Studios other renditions of Transformers characters taken (or not) your fancy? Have you bitten or is it more than you can chew? Share your thoughts right here on Seibertron's own Energon Pub!

I remember sending you guys an email about this six days ago. Welp, that sucks for me.

On Prime 1 Studio's Facebook page, we have a full gallery of their upcoming statue, The Last Knight Drift, ID'd as MMTFM-22. Check out the full gallery of the toy on their Facebook page here, or by clicking the image below. We have also have the product description below, which includes it's accessories, and it's dimensions.

If you like what you see, well, we also may feel bad for your wallet. But tell us your thoughts in the Pub forums below, and your thoughts on such statues in general!

"No pain. No anger. No hate.” Prime 1 Studio is proud to present MMTFM-22: Autobot Drift from The Transformers: The Last Knight. Autobot Drift also known as Master Swordsman is a true martial artist in combat. Against his enemies, he wields legendary warrior skills with a mastery no one can match. He remains cool and collected in the heat of battle by channeling ancient samurai discipline. When the exact moment arrives to attack, he draws his razor sharp sword to strike down Decepticons in a fraction of a second. He is a supporting character in the 2014 movie, Transformers: Age of Extinction and its sequel Transformers: The Last Knight. Autobot Drift comes with two set of arms to give a different look of the Masterful Autobot Swordsman.
[Product Specifications] - Size approximately 23 inches tall [(H)58.3cm (W)45.5cm (D)36.5cm] - Size approximately with swords equipped [(H)58.3cm (W)53.7cm (D)52.8cm] - One (1) designed theme base - LED Light-up function on Head - One (1) set of arms Greeting gesture - One (1) set of arms holding swords [Notice] Prototype samples are shown. Product details could be subjected to change without further notice.

That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

D-Maximal_Primal wrote:

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

But they are wrong. Because only TRUE 100% accuracy for the bot mode can only be achieved with a statue / figure.

-Kanrabat- wrote:

D-Maximal_Primal wrote:

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

But they are wrong. Because only TRUE 100% accuracy for the bot mode can only be achieved with a statue / figure.

They are about as wrong as many G1 MPs are wrong. They are really accurate and are better than the statues cause they can transform. to me, they do it better justice by this fact. 100% perfection is only achievable on a statue yes, but that is the same for almost any design, including the new MPs, so I still say MPM Bee and Barricade are proof you can truly give justice to movie figures and still transform

D-Maximal_Primal wrote:

-Kanrabat- wrote:

D-Maximal_Primal wrote:

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

But they are wrong. Because only TRUE 100% accuracy for the bot mode can only be achieved with a statue / figure.

They are about as wrong as many G1 MPs are wrong. They are really accurate and are better than the statues cause they can transform. to me, they do it better justice by this fact. 100% perfection is only achievable on a statue yes, but that is the same for almost any design, including the new MPs, so I still say MPM Bee and Barricade are proof you can truly give justice to movie figures and still transform

Yes, but that's not the point of the statue. The statue don't mean interaction. It only serve for the perfect look. Both serve different purposes. Thus it's like comparing apple and orange.

On Prime 1 Studio's Facebook page, we have a full gallery of their upcoming statue, Bumblebee Optimus Prime, ID'd as MMTFM-26. Check out the full gallery of the toy on their Facebook page here, or by clicking the image below. We have also have the product description below, which includes it's accessories, and it's dimensions. Of note, there are exclusive accessories for the, well, exclusive version, a Decepticon Seeker head and a forearm for the base!

If you love the Bumblebee movie Optimus, and have the cash to spend, this may be for you! If you enjoy or don't like what you see, tell us your thoughts on the Pub forums below!

“B-127, I pray this message finds you. Our war rages on. Planet Earth… Survival…” Prime 1 Studio is proud to present MMTFM-26: Optimus Prime Cybertron Edition from Transformers film, Bumblebee (2018 Film). The concept for the film was developed during the writers’ room assembled in the lead up to Transformers: The Last Knight and will be written by Christina Hodson and directed by Travis Knight. The old-fashioned storyline comes along with the brand newly discovery of our well-known Autobots member. Leader of the Autobot rebels during the war for Cybertron, Optimus Prime took part in the final battle for Cybertron against the Decepticons. He comes with two alternative right-arm holding the Ion Blaster and LED Light function on eyes. The Exclusive version comes with some Decepticon Seeker parts to be displayed on the base of Optimus Prime. This is a must have for all Transformers fans. 【Product Specifications】 ・Size approximately 32 inches tall [(H):81.9cm (W):50.6cm (D):44.9cm] ・Size approximately 32 inches tall with Blaster raised [(H):82.1cm (W):61.2cm (D):44.9cm] ・LED functions on Eyes ・One (1) designed base inspired from Cybertron planet ・Two (2) interchangeable Right-arm holding the Ion Blaster ・Decepticon Seeker parts (In the exclusive version only) [Notice] 3D renders for reference only. Prototype samples shown. Product details could be subjected to change without further notice.

As usual, Prime 1 knock it out of the park.
This look bad-ass!

He chonk in a good way