Possible First Look at Buzzworthy Bumblebee Legacy Dinobot

Anyone else think that fleshy color is a little unsettling?

JazZeke wrote:Anyone else think that fleshy color is a little unsettling?

FABULOUS Dinobot. Please add glitter.

That's all well and good, but when are we getting this beautiful nightmare?

JazZeke wrote:Anyone else think that fleshy color is a little unsettling?

I do, looks like chicken feet.

Lore Keeper wrote:That's all well and good, but when are we getting this beautiful nightmare?

I’m with you on this. Kingdom and Legacy are giving us some great BW rep without a doubt, but it’s a shame we’ll never get any Transmetals or Fuzors. I would love a Dinobot II and a Silverbolt, most of all a Transmetal Tarantulas.

Seems every time they re-do Dinobot, it gets weirder....

DeathReviews wrote:Seems every time they re-do Dinobot, it gets weirder....

Nah, turning a raptor into a Pachycephalosaurus, now that would be weird.

Thank you for sharing this pic, I really don't mind making a mess in my pants, really.

As big and fearsome as the Emperor Scorpion looks, it's venom isn't deadly to humans. That's one of the only reasons why these are sold in pet stores. Their poison is more honeybee level. Granted, it would hurt like blazes, so better to NOT get stung. But they're not like the fat-tail scorpions (smaller claws, thicker tails), which CAN be lethal.

I hope all of the repaints and remolds that featured in the original BW correlate to their equivalent modern counterparts.

I would love to see Dinotron and the other Beast Machines era Dinobots get some love:

- https://tfwiki.net/wiki/Dinotron_(BM)

JazZeke wrote:Anyone else think that fleshy color is a little unsettling?

Ok so it's not just me. My first thought was a newborn animal of some kind, maybe a chicken. That dark blue face and head just don't go with the rest of that body.

Honestly, the original Dinobot mold is still pretty decent that I'd be fine if we were to simply get reissues of Thrustor, Hardhead, and Dinotron if not retools of the Kingdom mold.

I think the color IS a bit unsettling, and I also love it. It's a great color, pretty accurate to the original, and it reminds me of all the small sort of "gory" details the original Beast Wars toys had. Love it. I mean, in Dinobot's case, you essentially transform his weapons by peeling his tail and ripping off the spine inside. The legs that form the chest had ribs molded into them, and his mutant mask was a skull...

Can't unsee it.




Might buy this to go with my Street Fighter crossover figures.

Emerje

Emerje wrote:Can't unsee it.




Might buy this to go with my Street Fighter crossover figures.

Emerje

That surprisingly works quite well, if it wasn't for the fact that Dino mode would look weirder, I'd say add a bit more red to complete the look.

I won't buy this, but it still looks very intriguing. I'm very curious to see the raptor mode.

You know, with the Buzzworthy Parasite/Skywasp figure, combined with Legacy Nightprowler, Hasbro proper is finally giving us the unreleased Universe "Halloween Horrorcon" Waspinator/Nightprowler 2-pack, albeit in updated mold form and released separately from each other, but still!

Sabrblade wrote:You know, with the Buzzworthy Parasite/Skywasp figure, combined with Legacy Nightprowler, Hasbro proper is finally giving us the unreleased Universe "Halloween Horrorcon" Waspinator/Nightprowler 2-pack, albeit in updated mold form and released separately from each other, but still!

We still need a Blackarachnia and Leatherhide, except we have no proper mold for the latter, in either form.

Jelze Bunnycat wrote:

Sabrblade wrote:You know, with the Buzzworthy Parasite/Skywasp figure, combined with Legacy Nightprowler, Hasbro proper is finally giving us the unreleased Universe "Halloween Horrorcon" Waspinator/Nightprowler 2-pack, albeit in updated mold form and released separately from each other, but still!

We still need a Blackarachnia and Leatherhide, except have no proper mold for the latter, in either form.

I'm pretty sure we'll never see a Generations figure of a Beast Wars Mutant. I think it's more likely we'll get, I don't know, Masterpiece Botbots before that happens.

Rtron wrote:

Jelze Bunnycat wrote:

Sabrblade wrote:You know, with the Buzzworthy Parasite/Skywasp figure, combined with Legacy Nightprowler, Hasbro proper is finally giving us the unreleased Universe "Halloween Horrorcon" Waspinator/Nightprowler 2-pack, albeit in updated mold form and released separately from each other, but still!

We still need a Blackarachnia and Leatherhide, except have no proper mold for the latter, in either form.

I'm pretty sure we'll never see a Generations figure of a Beast Wars Mutant. I think it's more likely we'll get, I don't know, Masterpiece Botbots before that happens.

Which is most likely why they are giving us this 2-pack rather than that 2-pack.

A shame, though. BW Soundwave was the only Mutant who suffered from GPS. A new one could have fixed that.

Of course, they could get around that by giving us the TR Mindwipe w/ Titan Master Nightbeat retoot we saw in the Convobat/Magna Convoy/Selects manga, and pair that with a Kingdom Blackarachnia redeco.

Sabrblade wrote:

Rtron wrote:

Jelze Bunnycat wrote:

Sabrblade wrote:You know, with the Buzzworthy Parasite/Skywasp figure, combined with Legacy Nightprowler, Hasbro proper is finally giving us the unreleased Universe "Halloween Horrorcon" Waspinator/Nightprowler 2-pack, albeit in updated mold form and released separately from each other, but still!

We still need a Blackarachnia and Leatherhide, except have no proper mold for the latter, in either form.

I'm pretty sure we'll never see a Generations figure of a Beast Wars Mutant. I think it's more likely we'll get, I don't know, Masterpiece Botbots before that happens.

Which is most likely why they are giving us this 2-pack rather than that 2-pack.

A shame, though. BW Soundwave was the only Mutant who suffered from GPS. A new one could have fixed that.

Of course, they could get around that by giving us the TR Mindwipe w/ Titan Master Nightbeat retoot we saw in the Convobat/Magna Convoy/Selects manga, and pair that with a Kingdom Blackarachnia redeco.

But the TR Mindwipe mold has problems with its soft plastic wings... ARGH!

I think the solution to the mutants is make them triple-changers. They already had robot mode bits so why not just give them a robot mode in addition to the beast modes?

That toy colored Dinobot is incredibly disconcerting. I don't like it.

I too am hoping for Hardhead/Thrustor retools!

D-Maximal_Primal wrote:That toy colored Dinobot is incredibly disconcerting. I don't like it.

I too am hoping for Hardhead/Thrustor retools!

It caught me off guard when scrolling; then i just lauuuughed...
I will likely still buy it.

Sentinel_Primal wrote:I think the solution to the mutants is make them triple-changers. They already had robot mode bits so why not just give them a robot mode in addition to the beast modes?

That is an amazing idea; using triple changers.
Some proof of concept artwork on that would be awesome.

It follows up on, to me at least, the Generation Toys beast releases of G1 bots and cons.They used the style guide done by a designer; I am forgetting the name currently, possibly T-Beast.

DeathReviews wrote:

Thank you for sharing this pic, I really don't mind making a mess in my pants, really.

As big and fearsome as the Emperor Scorpion looks, it's venom isn't deadly to humans. That's one of the only reasons why these are sold in pet stores. Their poison is more honeybee level. Granted, it would hurt like blazes, so better to NOT get stung. But they're not like the fat-tail scorpions (smaller claws, thicker tails), which CAN be lethal.

Annnnd another pair of pants ruined. Thanks, bro, really.

It’s TransformersTuesday! Coming exclusively to Target, check out the Transformers: Legacy Deluxe Red Cog Weaponizer figure that includes 5 blaster accessories with 7 interchangeable barrels and components. But that’s not all! Joining the Legacy party are the beasts that are taking over the Buzzworthy Bumblebee program! The Voyager Heroic Maximal Dinobot and Deluxe Evil Predacon Terrorsaur action figures convert to their classic dinosaur modes, with deco, inspired by their original 1996 Beast Wars toy releases.
Lastly, the latest Movie Masterpiece figure has just flown in: Decepticon Blackout inspired by the first live-action Transformers movie! This figure features 200+ deco ops, and over 50 points of articulation, and comes with a non-converting Scorponok mini-figure.
These items will be available at later date from Target, with a limited quantity available from Hasbro Pulse. Be sure to keep an eye on our channels for when these items will go live.

So is Red Cog meant to be the Cog that pairs with Grand Max?

Gearslide wrote:So is Red Cog meant to be the Cog that pairs with Grand Max?

The deco on it appears to actually be lifted wholesale from a generic from the Netflix WFC shows, but there's nothing stopping anyone from repurposing it as the Grand Max Cog.

I LOVE the new extra guns Cog comes with! Will defiantly pick him up on set, and honestly toy deco Terrorsor looks a bit better to my eye than the previous release

I hope they don't bump Red Cog up a price class for those extra weapons. I like three of each Weaponizer style or troopbuilder figure normally but in this case, I think I want more due to the extra weapons. Being priced as a voyager wouldn't be ideal.

It looks like the five blasters are:
1: One standard Cog gun.
2: One standard Cog gun? A second one wasn't shown in the pictures but can be presumed.
3: One Ultra Magnus looking gun.
4: One Chromia looking gun.
5: One Cyberverse Arcee looking gun.

The seven interchangeable barrels/components are:
1. One Chromia looking silencer.
2. One Ultra Magnus looking barrel extension as seen with some 3D printed upgrade sets.
3. One half of a bomb?
4. One half of a bomb? Looks kind of like the Omnitrix when combined.
5. One CW Streetwise/Prowl looking triple barrel shotgun extension.
6. One TMNT Mutagen canister looking extension.
7. One kind of Brunt looking cannon barrel with extra pieces attached to it. This has a 5mm peg on the underside. Maybe it's the fifth blaster instead of the second standard Cog gun. But then what would the last barrel/component be?

They look like the original guns from the other figures but are different. Chromia's blaster doesn't have a 5mm port in front for instance. It normally has a 3mm post instead. Chromia's silencer has the small tab under it whereas this new one doesn't. Also, the Ultra Magnus blaster seems to be quite a bit smaller.

It would've been more interesting to me if those extra pieces where somehow designed to help facilitate combined forms between the Weaponizers/Modulators/Fossilizers. Sometimes all you need is a double ended 5mm port or peg piece or a port to peg to get everything to connect together better. If anything it would be nice if the Powerdashers could have something designed to get them an actual combined mode. Some of those pieces just don't like to play well with the others when combining them. I think it's Zetar's fault for having been made from a Decepticon mold. Maybe in a three pack reissue as some of them are difficult to get a hold of now.

Grahf_ wrote:I hope they don't bump Red Cog up a price class for those extra weapons.

He's a weapons accessory pack like Deluxe Centurion Drone and Tricranius.

Sabrblade wrote:

Grahf_ wrote:I hope they don't bump Red Cog up a price class for those extra weapons.

He's a weapons accessory pack like Deluxe Centurion Drone and Tricranius.

Damn.

Grahf_ wrote:

Sabrblade wrote:

Grahf_ wrote:I hope they don't bump Red Cog up a price class for those extra weapons.

He's a weapons accessory pack like Deluxe Centurion Drone and Tricranius.

Damn.

Now with even fewer weapons.

Grahf_ wrote:I hope they don't bump Red Cog up a price class for those extra weapons. I like three of each Weaponizer style or troopbuilder figure normally but in this case, I think I want more due to the extra weapons. Being priced as a voyager wouldn't be ideal.

It looks like the five blasters are:
1: One standard Cog gun.
2: One standard Cog gun? A second one wasn't shown in the pictures but can be presumed.
3: One Ultra Magnus looking gun.
4: One Chromia looking gun.
5: One Cyberverse Arcee looking gun.

The seven interchangeable barrels/components are:
1. One Chromia looking silencer.
2. One Ultra Magnus looking barrel extension as seen with some 3D printed upgrade sets.
3. One half of a bomb?
4. One half of a bomb? Looks kind of like the Omnitrix when combined.
5. One CW Streetwise/Prowl looking triple barrel shotgun extension.
6. One TMNT Mutagen canister looking extension.
7. One kind of Brunt looking cannon barrel with extra pieces attached to it. This has a 5mm peg on the underside. Maybe it's the fifth blaster instead of the second standard Cog gun. But then what would the last barrel/component be?

They look like the original guns from the other figures but are different. Chromia's blaster doesn't have a 5mm port in front for instance. It normally has a 3mm post instead. Chromia's silencer has the small tab under it whereas this new one doesn't. Also, the Ultra Magnus blaster seems to be quite a bit smaller.

It would've been more interesting to me if those extra pieces where somehow designed to help facilitate combined forms between the Weaponizers/Modulators/Fossilizers. Sometimes all you need is a double ended 5mm port or peg piece or a port to peg to get everything to connect together better. If anything it would be nice if the Powerdashers could have something designed to get them an actual combined mode. Some of those pieces just don't like to play well with the others when combining them. I think it's Zetar's fault for having been made from a Decepticon mold. Maybe in a three pack reissue as some of them are difficult to get a hold of now.

There's one gun that's meant to be used as a connector for Earthrise Arcee to wear a Cog weapon pack.

chuckdawg1999 wrote:There's one gun that's meant to be used as a connector for Earthrise Arcee to wear a Cog weapon pack.

Yep.

Don't know if anyone else mentioned this, but the big rifle for Red Cog looks like Elita 1's invented rifle from the show.

I will admit the photoshop job for the bomb halves on that third Cog picture looks outright hilarious!

SpaceEagle wrote:I will admit the photoshop job for the bomb halves on that third Cog picture looks outright hilarious!

That's a really strange thing to do, I guess someone forgot to take a picture of that and thought nobody would notice. They're clearly the exact same image copy and pasted on both sides and larger than they should be, the vehicle pic has them pegged in properly.

They really couldn't have come up with a better name than "Red Cog"? Feels lazy. I like the included weapons, though I don't know exactly what I'm going to do with all of them (Will pointed out what to do with one of them). At least he has a new head.

Not going to kill myself to get Dinobot and Terrorsaur, If they end up being hard to get then so be it.

Blackout is a must, though I still haven't opened Starscream and Ratchet yet...

Emerje

Emerje wrote:They really couldn't have come up with a better name than "Red Cog"?

This is the same Hasbro that gave us "Red Swoop".

But don't worry, he has a name. It's "Security Officer".

I think there's a missed opportunity of the Terrorsaur and Dinobot molds being used for a crossover with the new Jurassic World movie.

Emerje wrote:

SpaceEagle wrote:I will admit the photoshop job for the bomb halves on that third Cog picture looks outright hilarious!

That's a really strange thing to do, I guess someone forgot to take a picture of that and thought nobody would notice. They're clearly the exact same image copy and pasted on both sides and larger than they should be, the vehicle pic has them pegged in properly.

They really couldn't have come up with a better name than "Red Cog"? Feels lazy. I like the included weapons, though I don't know exactly what I'm going to do with all of them (Will pointed out what to do with one of them). At least he has a new head.

Emerje

I'm guessing after the photoshoot they saw the pictures and went "crap, we forgot to show the storage in robot mode!" then scrambled to photoshop them on there, hoping nobody would notice, lol.

Also new head? Looks like the same Cog head to me - I thought it'd be cool if they gave it a new head more resembling Cog's G1 toy than Cerebros's cartoon face.

Rodimus Prime wrote:I think there's a missed opportunity of the Terrorsaur and Dinobot molds being used for a crossover with the new Jurassic World movie.

Maybe the first set didn't sell well enough.

Is that Grimlock's head on the raw chicken colored Dinobot?

Rodimus Knight wrote:Is that Grimlock's head on the raw chicken colored Dinobot?

That it is. Although you could argue they gave Grimlock Dinobot's toy-accurate head and his head was a premold for this dinobot

Rodimus Knight wrote:Is that Grimlock's head on the raw chicken colored Dinobot?

Yes, Grimlock used the toy head while Dinobot originally used the animation head. And now Dinobot gets to have his toy head

....'nuff said!

Sabrblade wrote:

chuckdawg1999 wrote:There's one gun that's meant to be used as a connector for Earthrise Arcee to wear a Cog weapon pack.

Yep.

I hope there are instructions with Rog that explain how to build the weapons pack.

Ransack pics.

Sabrblade wrote:Ransack pics.

That one person who would always go on and on about Deluxe Insecticons always being ignored, I hope he's happy

I am curious to see Goldbug however to complete this set. Probably just the SG version with the same paint used on Selects Black Zarak ( a not-true gold), but at least dosen't have GPS.

o.supreme wrote:

Sabrblade wrote:Ransack pics.

That one person who would always go on and on about Deluxe Insecticons always being ignored, I hope he's happy

I am curious to see Goldbug however to complete this set. Probably just the SG version with the same paint used on Selects Black Zarak ( a not-true gold), but at least dosen't have GPS.

I don't think you're wrong about Goldbug. Anyone expecting the Netflix mold should get ready for disappointment.

Thanks to the site Stories from the Toyshelf, we have our first look at the upcoming ransack figure. It is a slight retool of the Legacy Kickback mold in the colours of the original G1 ransack toy, which you can see below for comparison. Ransack is said to come in a Target exclusive Buzzworthy Bumblebee four pack which also includes Goldbug, Toy Color Scorponok. You have to give it to those Buzzworthy four packs, while totally random, they still find a way to have a Bumblebee connection, this time with Goldbug. Speaking of Goldbug, he is now the last one to be seen.

You'll let us know what you think of Ransack.






















Transformers G1 1985 Ransack Gallery