In Hand Images of Transformers Studio Series Ironhide
Wednesday, June 13th, 2018 8:05AM CDT
Categories: Movie Related News, Toy NewsPosted by: Va'al Views: 31,933
Topic Options: View Discussion · Sign in or Join to reply
The images show us the weapons specialist in both GMC vehicle and full arm cannoned robot mode, while also giving us comparisons in truck mode with Studio Series deluxe Jazz (as both share the 2007 live action movie designs), and in robot mode with Jazz again and more recently seen Megatron. Check them all out below, and let us know what you think!
News Search
Got Transformers News? Let us know here!
Most Popular Transformers News
Most Recent Transformers News
Posted by Carnivius_Prime on June 13th, 2018 @ 8:10am CDT
Jazz's legs be backwards. Gives him bigger feet though. But oddly somehow the wheels are still on the outside? How they do that... I'mma play with mine and have a look.
edit: think they've actually swapped the legs around at the hip balljoints. odd.
Posted by Sabrblade on June 13th, 2018 @ 8:29am CDT
Posted by Mindmaster on June 13th, 2018 @ 8:37am CDT
However, I’m a little concerned that Ironhide will be way too big compared to Ratchet.
Posted by Sabrblade on June 13th, 2018 @ 8:39am CDT
Well, he sure does look a good bit shorter than the already tiny Optimus, while Ratchet's a pretty tall Deluxe.Mindmaster wrote:However, I’m a little concerned that Ironhide will be way too big compared to Ratchet.
Posted by william-james88 on June 13th, 2018 @ 8:39am CDT
Posted by -Kanrabat- on June 13th, 2018 @ 8:40am CDT
Posted by Carnivius_Prime on June 13th, 2018 @ 8:41am CDT
Sabrblade wrote:Well, he sure does look a good bit shorter than the already tiny Optimus, while Ratchet's a pretty tall Deluxe.Mindmaster wrote:However, I’m a little concerned that Ironhide will be way too big compared to Ratchet.
Right. As long as he's somewhere in between these two (shorter than Prime, taller than Ratchet) then it's good.
Posted by EvasionModeBumblebee on June 13th, 2018 @ 8:47am CDT
Posted by bacem on June 13th, 2018 @ 9:05am CDT
Posted by william-james88 on June 13th, 2018 @ 9:51am CDT
Posted by -Kanrabat- on June 13th, 2018 @ 9:54am CDT
bacem wrote:I hope ironhide is mistransformed there, because as it is, the proportion looks odd, really reminds me of the FAB mold.
It just the bumper thing really. So far, Ironhide look FABulous!
Posted by Carnivius_Prime on June 13th, 2018 @ 9:55am CDT
william-james88 wrote:What is up with him having 6 whees in robot mode (2 on each side, shoulder and feet)
And only the 'fake' ones have paint? Dunno. Not too bothered at moment. Just want to buy it and figure out the toy for myself. I'd like to know if the bumper is at least easily removable for customisation purposes.
Posted by Overcracker on June 13th, 2018 @ 10:34am CDT
A bit larger than Ratchets's ambulance Hummer.
Still the robot mode looks quite nice. May have to actively look for him when he's released.
Is he considered Wave 3 of SS?
What else would be in Wave 3?
Sideswipe?
The Twins?
Showckwave?
Soundwave?
Sideways?
Truck Megatron?
Posted by galvatron00 on June 13th, 2018 @ 10:40am CDT
So..we need a SS "Concept" Camaro to go with the rest of the Transformers 2007 bots. I'm almost in on these. I miss my Movie Premium Ratchet so I may need to get that deluxe just to paint up a little bit. I think I'll have an easier time finding SS Ironhide than I would MPM Ironhide.
Posted by Nathaniel Prime on June 13th, 2018 @ 11:08am CDT
Overcracker wrote:The Topkick mode is a little small in relation to Jazz. The Topkick truck was huge in reality.
A bit larger than Ratchets's ambulance Hummer.
Still the robot mode looks quite nice. May have to actively look for him when he's released.
Is he considered Wave 3 of SS?
What else would be in Wave 3?
Sideswipe?
The Twins?
Showckwave?
Soundwave?
Sideways?
Truck Megatron?
I'm really hoping for a new Deluxe Soundwave based off his Human Alliance figure, a new Deluxe version of Barricade, maybe based of/simplified from his Masterpiece, and a new Voyager Sentinel Prime that should basically be a down-scaled version of his Leader toy. Other than that, maybe some new versions of other characters would be nice too. I'd love a ROTF Sideswipe based off of his Deluxe figure. Ironhide looks great BTW. I want to see some news on his Masterpiece though
Posted by Carnivius_Prime on June 13th, 2018 @ 11:14am CDT
So what I thought were silver painted wheels are just extra round bits under those front truck parts in robot mode? And the actual wheels are beneath those? That matches with what the Masterpiece figure does. So that's just one pair of wheels in the torso? And the feet appear to have the other two wheels in them facing downwards like the Deluxe toy does which isn't movie-accurate but understandable for this transformation while the CGI model and MPM figure has those wheels in the upper thighs, and to simulate that, this Studio toy has wheel shapes and details sculpted in those areas
So yeah this figure's making more sense to me now. Still don't get why the front bumper just ends up in the middle and not even able to seperate or fold away but eh, can't have everything. We'll see what we can do there when actually having bought the figure.
Nathaniel Prime wrote: I'd love a ROTF Sideswipe based off of his Deluxe figure.
I'd love a Sideswipe based on his Sidearms figure as that looked way better to me and had much more stable feet and you could arrange the 'toes and heels' to point backwards so they worked as support stands while still keeping the wheelie look from the front. Plus I I love the transformation of that toy. I'd like to keep the guns too but add his swords (either as seperate pieces or perhaps find some way to turn the back kibble into them. I hated how the original RotF figure did them)
Posted by Carnivius_Prime on June 13th, 2018 @ 11:23am CDT
Cannons are removable.
Scale looks good to me.(a lil hard to tell cos of perspective, but at least Ratchet & Ironhide are about on the same level and can see Ironhide is a bit taller and bulkier as he should be)
Quite tidy from the side.
Posted by Nathaniel Prime on June 13th, 2018 @ 11:44am CDT
Carnivius_Prime wrote:I'd love a Sideswipe based on his Sidearms figure as that looked way better to me and had much more stable feet and you could arrange the 'toes and heels' to point backwards so they worked as support stands while still keeping the wheelie look from the front. Plus I I love the transformation of that toy. I'd like to keep the guns too but add his swords (either as seperate pieces or perhaps find some way to turn the back kibble into them. I hated how the original RotF figure did them)
I meant his DOTM Deluxe, but now that you mention it, Sidearm Swipe would be a much better choice. I do love thr original ROTF Deluxe though. Anyway, it would be better and more movie accurate if the swords were separate pieces, like SS Prime's. If they could be mounted on his arms the same way, that would be great
Posted by Carnivius_Prime on June 13th, 2018 @ 11:52am CDT
Nathaniel Prime wrote:I meant his DOTM Deluxe, but now that you mention it, Sidearm Swipe would be a much better choice. I do love thr original ROTF Deluxe though. Anyway, it would be better and more movie accurate if the swords were separate pieces, like SS Prime's. If they could be mounted on his arms the same way, that would be great
Ah ok. I never had the DotM figure and put more priority on getting two Bees, and the two available Wreckers when it came to Deluxe Autobots of that era. I wasn't keen on the look of the car mode being a convertible and not having floorboards. And the dull grey plastic was a bit off putting as I still had the shiny silver Sidearms Swipe at the time. But yeah I hope they get around to Swipey. They've done all the 2007 Autobots now so an RotF character could be next? Who knows?
hm, probably someone at Hasbro actually...
Posted by dragons on June 13th, 2018 @ 11:55am CDT
-Kanrabat- wrote: I bet he's misstransformed here.
Ironhide looks ok front bumper puts me off little everything else on him looks good for Figure
Posted by Ig89ninja on June 13th, 2018 @ 12:55pm CDT
Posted by Wolfman Jake on June 13th, 2018 @ 1:00pm CDT
I do wish the bumper at least collapsed a bit on Ironhide. They've done transformations before where front bumpers fold back at the sides. I don't know why they couldn't do that here, unless it was a dreaded "parts count" problem.
Posted by Hip-Hoptimus Rime on June 13th, 2018 @ 1:07pm CDT
I honestly wonder if its mistransformed, it's so clearly out of place.
Posted by Wolfman Jake on June 13th, 2018 @ 1:50pm CDT
Hip-Hoptimus Rime wrote:Buying for sure, I love Movie Ironhide and this looks pretty good, but the first thing I'm going to do is yank the front bumper in robot mode.
I honestly wonder if its mistransformed, it's so clearly out of place.
That's how he's packaged and how he's depicted on the back of the box. I'm pretty sure that's where the bumper goes, unfortunately. In my opinion, it's far less of a mess that Studio Series Optimus Prime's chest.
Posted by Carnivius_Prime on June 13th, 2018 @ 1:55pm CDT
Wolfman Jake wrote: In my opinion, it's far less of a mess that Studio Series Optimus Prime's chest.
but i don't think Prime's chest is a mess at all or maybe i've forgotten what it looked like in person since i painted mine. I dunno. But I do find that bumper on Ironhide very distracting. maybe I'll get used to it or maybe there will be some kind of way to improve it... or maybe it's easily removable and not pinned on. It's the only thing I don't care for on this otherwise fine Ironhide (other than the chest looking a little awkward which seems to be an issue with most Ironhide figures).
I wanna know when this Ironhide is available for purchase. Cos I got £30 or so sitting here for it. I want my 2007 Studio Squad complete!
Posted by ZeldaTheSwordsman on June 13th, 2018 @ 2:40pm CDT
Posted by Carnivius_Prime on June 13th, 2018 @ 2:46pm CDT
ZeldaTheSwordsman wrote:Carnivus Prime, Optimus' chest is a bit of a mess. The windows are a bit too high, at the wrong angle, and have a bit too much of a gap between them. The way they're hinged results in big fat hinges replacing detail present on other figures. And the torso ends up looking a bit blocky due to kibble on the sides.
oh god... just.. no. I'm not going through all this again. Let's all just forget about Prime for now. Lookee...Ironhide! Woo!
Posted by Shuttershock on June 13th, 2018 @ 2:52pm CDT
Here’s hoping for a Deluxe Barricade and Voyager Bonecrusher to complete the 07 crew. Sure, the Megatron wouldn’t be correct, but the one we got is even better imo.
Posted by Ig89ninja on June 13th, 2018 @ 5:07pm CDT
Shuttershock wrote:Looks pretty good. My only experience with movie Ironhide was the DOTM Voyager, which I found to be a fiddly mess with poor articulation in the arms, so as long as they avoid THAT this should be pretty good.
Here’s hoping for a Deluxe Barricade and Voyager Bonecrusher to complete the 07 crew. Sure, the Megatron wouldn’t be correct, but the one we got is even better imo.
I’m pretty sure that Bonecrusher was already confirmed
Posted by ZeldaTheSwordsman on June 13th, 2018 @ 5:22pm CDT
Carnivus, I admit Optimus isn't as bad as I first made him out to be, but his chest has some definite visual flaws and mismatches to it. Saying otherwise is like saying G2 Slingshot is unbreakable.
Purely from a fun standpoint, I also wish he had ball-jointed sun visors like ROTF Leader and Battle Blades Optimus had. Because not only did that allow the visors to be positioned in robot mode, it let you give his truck mode angry eyebrows and that's hilarious.
But yes, that Ironhide is smexy. One of the best looking ones we've had, certainly. Not sure which I want more, him or the DotM Leader (for size purposes with Leader Optimus). He looks very fine, that bumper aside (and that may well be a mistransformation), and has the best proportioned and most accurate cannons.
One of my big hopes for the Studio series is a new Leader-class version of THE ETERNAL GLORY OF JETFIRE! As much as I complained about Studio Series Optimus, he's nowhere near the kibbletastic mess that ROTF Leader Jetfire is. He's still cool, but hooo boy was he screwed over by not only having to be designed to combine with Optimus, but also having to have electronics because Hasbro higher-ups were still in their "l34d3r (1455 t0yz mu5t h4ves t3h electroniczorz! 4lw4yz!" phase.
Posted by D-Maximal_Primal on June 13th, 2018 @ 8:35pm CDT
ZeldaTheSwordsman wrote:D-Maximal_Primal, Ironhide's movie 1 toy does not have the cannons permanently on the arms. It would sure be nice if it did, but alas. I know this because I have looked for him on eBay and seen many instances listed sans cannons. Sigh.
I'm curious as to why you prefer 2007 Blackout to Studio Series. He looks crude detail-wise except for the arms, his altmode bits are dealt with far less efficiently, his main rotor doesn't collapse as well, and his feet are completely wrong. Is it because of the Scorponok gear-link gimmick
My bad, I meant his 1st and 2nd movie appearance where his cannons were arm mounted, not like DotM where they were stored on his back and hand held. Same with Blackout. I am not talking about which toys I like best, merely movie look, and sometimes using the toy they got as a reference.
As for Ironhide: I am not sure yet. The bumper is out of place, and the arms seem really shrimpy. I don't like the arms on the DotM voyager, and I prefer the arms on the 2007 voyager the MP uses the proper arms position like the DotM voyager, but actually makes the arms look a proper size, unlike these ones.
Also still really not a fan of the robot mode scale being the set point and how small they have made the Autobots so far. I know it's how things work here but I am allowed not to like it!
Posted by ZeldaTheSwordsman on June 13th, 2018 @ 9:34pm CDT
Scale is one thing that's always been an issue with Transformers and the movie lines have it really bad. So I find it kinda nice that there's a line that tries to address it. As for the small Autobots... I blame that on Blackout and Grimlock's enormous afts combined with the fact that Leader is the largest size class HasTak are willing to use for it (and that Leader-class and Voyager class have shrunk substantially since ROTF).
Posted by D-Maximal_Primal on June 13th, 2018 @ 9:41pm CDT
So between these 2... it's a hard fight as to which is my favorite. But neither are slouches in any regards and they should both be picked up. Gosh I love these leaders
Posted by william-james88 on June 13th, 2018 @ 10:00pm CDT
D-Maximal_Primal wrote:Also still really not a fan of the robot mode scale being the set point and how small they have made the Autobots so far. I know it's how things work here but I am allowed not to like it!
I too have issues with that. When I first heard that Blackout and Grimlock would both be leaders I thought for sure there would be no such thing as a unified scale. Both those characters are far from being as big as oneanother so clearly them both being leaders means scale is not that big a deal with this line and it would be similar to other movie lines. I was wrong.
But what saddens me here is that with them making blackout in scale with the voyager class decepticons, I cant use him (as Grindor) to re-enact that forrest battle scene with my Leader Prime, Leader ROTF Megatron and Leader HFTD Starscream
So just to say, I am with you D-Max, I too allow myself not to like it.
Posted by ZeldaTheSwordsman on June 13th, 2018 @ 11:01pm CDT
First, in-scale with those Leader-class figures, Blackout & Grindor would have to be Supreme class. They're substantially taller than Optimus, Megs, and Screamer (look at how Optimus has to climb up onto Grindor to go after his head) and are rather beefy to boot.
Second, the Studio Series is at least supplying a Voyager ROTF Megs, Screamer, and Optimus so the SS Blackout mold has versions of those three in-scale with him.
Third, while SS Blackout isn't in scale with those Leader-class figures, he's still at least less dwarfed by them than his 2007 Voyager counterpart would be XD.
Posted by Carnivius_Prime on June 14th, 2018 @ 12:40am CDT
ZeldaTheSwordsman wrote:
Carnivus, I admit Optimus isn't as bad as I first made him out to be, but his chest has some definite visual flaws and mismatches to it.
Yet oddly enough the stomach area is one of the most accurate of all Prime voyager figures. Far more so than the BB mold.
Also weirdly enough while looking for something to use as the sun visors on my Studio Prime I found I somehow actually have the sun visor parts from the RotF Leader figure in my parts box. Ok far too large to use on Studio Prime but where the hell did they come from? I did own that figure but I sure as heck sold it complete so dunno where these ones came from. Must have been in some large haul of TF figures and bits I got a while ago I guess. I'm sure some folk are missing those from their RotF Leader Prime.
ZeldaTheSwordsman wrote:Well, to be fair, Will..
First, in-scale with those Leader-class figures, Blackout & Grindor would have to be Supreme class. They're substantially taller than Optimus, Megs, and Screamer (look at how Optimus has to climb up onto Grindor to go after his head) and are rather beefy to boot.
Blackout's figure size is accurate to this chat that states he is 33 feet though. Which shows all three of the 2007 Decepticons in the Studio series to be correct scale with it.
So this means Grindor is a lot bigger than Blackout? Blackout turns into a Sikorsky MH-53 Pave Low while Grindor turns into a Sikorsky CH-53E Super Stallion which aren't massively different in size though the CH-53E is the bigger of the two (and has 7 rotor blades so Grindor should have 7 but his robot mode is pretty much just Blackouts (presumably upsized a lot) and the fact they're two different helicopters in alt-mode more than likely is because the MH-53 was retired in 2008 and Revenge of the Fallen came out in 2009).
So yeah... nothing's simple with Blackout and Grindor.
Posted by ZeldaTheSwordsman on June 14th, 2018 @ 2:53am CDT
Posted by Carnivius_Prime on June 14th, 2018 @ 3:01am CDT
ZeldaTheSwordsman wrote:I think the size Grindor is shown to be on screen is probably more accurate for them, considering that the MH-53 and its siblings are 88' long (versus, say, Optimus' 30-something foot truck mode) and very bulky, and their robot mode doesn't have gangly arms and bowed, digitigrade legs to keep the height down (unlike Starscream, whose jet mode is 62' long). Blackout's size on screen is harder to judge, I forget at the moment whether he's ever properly in-frame with other characters the way Grindor is.
I could only have a quick look as gotta go out soon but I grabbed some screens from the last battle and while I can't see Blackout standing next to any other TFs, his size compared to nearby buildings has him not looking too large. (sorry for blurryiness, these are taken from a lower quality video I downloaded for reference as my PC has no Blu Ray drive, my PS4 does that for me)
Posted by ZeldaTheSwordsman on June 14th, 2018 @ 3:17am CDT
By the way, I don't suppose you happened to have any ROTF Leader Jetfire weapons in that parts box do you?
Posted by ToaLeePrime on June 14th, 2018 @ 3:38am CDT
Posted by Carnivius_Prime on June 14th, 2018 @ 5:45am CDT
ZeldaTheSwordsman wrote:By the way, I don't suppose you happened to have any ROTF Leader Jetfire weapons in that parts box do you?
Nope sorry. I did have a few parts for that figure including his cane and a couple jet panels but used them to complete a Jetfire I found at a car boot sale and sold it. Amusingly I did just find the head of The Fallen in the box (never had that figure) so I may just give it to Prime as a trophy.
Pic for you.
Revenge Prime being angry truck because Studio Prime is using his truck bed as a posing platform. (that took a while changing into truck mode again.. and still not quite got it lined up properly, the truck front windows won't stayed fixed properly to the hood tabs, something's not quite right with my smooshing.)
Posted by william-james88 on June 14th, 2018 @ 7:45am CDT
ZeldaTheSwordsman wrote:Second, the Studio Series is at least supplying a Voyager ROTF Megs, Screamer, and Optimus so the SS Blackout mold has versions of those three in-scale with him.
All I was missing was a leader class movie helicopter bot to make it in this nice leader class scale and now I am stuck having to buy a bunch of new toys instead while still having an empty spot on my movie leader shelf.
Its simply not the scenario I had been hoping for when I first heard of this toy coming out.
Posted by ZeldaTheSwordsman on June 14th, 2018 @ 9:51am CDT
However, given how much smaller than Grindor Blackout seems to be on screen, the Studio Series Blackout is in scale with those Leaders by that measure (if being used to represent Blackout at least).
Posted by Carnivius_Prime on June 14th, 2018 @ 10:04am CDT
ZeldaTheSwordsman wrote:However, given how much smaller than Grindor Blackout seems to be on screen, the Studio Series Blackout is in scale with those Leaders by that measure (if being used to represent Blackout at least).
Yep. I think out of all the current figures, only Grimlock is out of scale but he's big enough to still dominate the series well and a true scale figure of him (maybe Metro/FortMax size? I dunno since i never bought those generations figures so I'm just estimating from pics) would be very expensive and impractical.
Posted by william-james88 on June 14th, 2018 @ 10:08am CDT
ZeldaTheSwordsman wrote:Well, your hopes were not exactly realistic.
Thats why they are hopes.
Posted by Sabrblade on June 14th, 2018 @ 10:27am CDT
Wouldn't they be more like pipe dreams, then?william-james88 wrote:ZeldaTheSwordsman wrote:Well, your hopes were not exactly realistic.
Thats why they are hopes.
Posted by Carnivius_Prime on June 14th, 2018 @ 10:49am CDT
Sabrblade wrote:Wouldn't they be more like pipe dreams, then?william-james88 wrote:ZeldaTheSwordsman wrote:Well, your hopes were not exactly realistic.
Thats why they are hopes.
That made me think of the character Pipes and then wonder if he had a movieverse counterpart and turns out he does (even though even his G1 self barely has any toys).
He's called Blowpipe and the third deco of the rather cool 2007 Dropkick mold but a Walmart exclusive doublepark with a slightly darker Sideways.
I miss playing with that mold actually. I think I'll have to keep a look out at car boot sales for one (I've missed the last two sales cos of other priorties and commitements but hope to go again soon)
Posted by Spider5800 on June 14th, 2018 @ 2:40pm CDT
Carnivius_Prime wrote:Couple more pics from https://www.facebook.com/Planetiacon.stfu/
Cannons are removable.
Scale looks good to me.(a lil hard to tell cos of perspective, but at least Ratchet & Ironhide are about on the same level and can see Ironhide is a bit taller and bulkier as he should be)
Quite tidy from the side.
He looks great next to everyone except Optimus, who is just too small IMO (and the wrong shades, and has a crappy chest, etc).
Any way to compare him to the movie 1 voyager? I'm sure he's shorter, just want to see it.
Posted by Carnivius_Prime on June 14th, 2018 @ 3:20pm CDT
Spider5800 wrote:
He looks great next to everyone except Optimus, who is just too small IMO (and the wrong shades, and has a crappy chest, etc).
Any way to compare him to the movie 1 voyager? I'm sure he's shorter, just want to see it.
No idea if they even have that figure. Odd one to bring up after dissing the Studio Prime when the 2007 Voyager, while a decent action figure at the time, is the absolute worst for accuracy and truck kibble and chest fakery and such.
Posted by Spider5800 on June 14th, 2018 @ 4:40pm CDT
Carnivius_Prime wrote:Spider5800 wrote:
He looks great next to everyone except Optimus, who is just too small IMO (and the wrong shades, and has a crappy chest, etc).
Any way to compare him to the movie 1 voyager? I'm sure he's shorter, just want to see it.
No idea if they even have that figure. Odd one to bring up after dissing the Studio Prime when the 2007 Voyager, while a decent action figure at the time, is the absolute worst for accuracy and truck kibble and chest fakery and such.
I'm talking about comparing movie 1 Ironhide to SS Ironhide, I think you mistook this for me asking to compare the OP's from those lines.