First Look at Prime 1 Studio Transformers Dark of the Moon Sentinel Prime #ワンフェス #wf2018s

THAT is an incredible looking Jet Optimus!

These do show off those gorgeous designs beautifully even if 'just' statues.

In what they called their Sneak Peek of the Day, officially licensed Transformers statue makers Prime 1 Studio have showed off on Instagram the head sculpt for their upcoming Bumblebee figure - this time styled after the new battle mode, complete with battle mask, we've seen in trailers and will see in the Bumblebee Movie come December!

Check out the grey prototype below, with the visor / hive patterned eyes glowing with (sweet baby boy) blue below, and let us know what you think of the Buzz surrounding this new movie and its related merchandise in the Energon Pub discussion boards below!

A double whammy today from Prime 1 Studio, the officially licensed Transformers statue makers, as the Bumblebee Movie hype train has clearly left the Cybertron station - the next sculpt they're teasing on their Facebook page is none other than big bulky bad, possibly triple changing though we have no full confirmation yet, Blitzwing himself, as seen in most of the footage shown in trailers and clips so far from Paramount!

Check out the grey prototype, this time with red optics, below, and let us know what you think in the Energon Pub discussion boards. Who is buying these statues after all?

So I guess blitzwing is relegated to a seeker and his design matches, and since dropkick and shatter are triple changers, maybe he's their triple changing leader?

Theories aside, I love the head design. It's like the "07 Movie G1 Seeker" head mixed with Kold War Scorpion.

Is that a tank tread on the bottom left?

not sure this is the best place to post this, but i have to ask:
why did they make a character who looks dang-near spot-on to g1 starscream, then call him blitzwing? it's not like starscream had a consistent design over the last 10 years, with the movie, prime, RID, and hte cybertron games. why the change?

Short Circuit wrote:So I guess blitzwing is relegated to a seeker and his design matches, and since dropkick and shatter are triple changers, maybe he's their triple changing leader?

Shatter is rumored to be the lead Decepticon of this movie.

The face looks very Blackout-esc to me.

Straxus anyone?

Thanks to the Prime 1 Studio Instagram page straight from Shanghai Comic Con, we have word that their latest statue has been revealed, and it is none other than the main character from the upcoming movie named after him: Bumblebee!

This new statue features movie Bumblebee in all his VW goodness, and includes his new rounder and more cuddly shape. The statue also comes with his newly redesigned arm blaster, and features a stand made out of what appears to be simulated broken concrete, broken pillars, a spare tire, and underneath, a nice metal stand with an Autobot symbol on it. Of note here is that this statue uses the door wings that the movie character himself does not have, though this is has been a consistent design in almost all of his toys in this form, so there's no real surprise there.

Check out the image of the new Prime 1 statue below, and let us know what you think of this guy in the comments section below!

I'm starting to hope that we might see the door wings in the final CG design. It would make sense that they would be there since the robot mode would look more complete with them.

A statue made to be as much 100% movie accurate as possible.

Still got screwed with the door-wings.

I wonder if the door wings will be retractable in the film, kinda like the battle mask?

I should have waited to buy a SS Bumblebee until after they push out a second series of them where the door wings fold onto the back.

I wonder if people will continue to be in denial of the doorwings even after the movie comes out and the door wings most likely appear up-right in a bunch of scenes.

Silverwing wrote:I wonder if the door wings will be retractable in the film, kinda like the battle mask?

I think we saw the wings retract a little when he was trying to get through the door to the house, but I might have been seeing that wrong.

Emerje

He looks better with door wings and they fit his whole Bee thing anyways.

Seibertron's own Nathaniel Prime has directed us towards Prime 1 Studios Facebook who have teased an upcoming Transformers: Bumblebee statue of Optimus Prime. The image originally uploaded to their Facebook page has since been taken down, but we have mirrored it below. Optimus Prime will be joining Prime 1 Studios Blitzwing and Bumblebee in their Bumblebee movie statue range.



With Prime 1 Studio's pricing, this will be a serious investment in anyones Transformers display. How have Prime 1 Studios other renditions of Transformers characters taken (or not) your fancy? Have you bitten or is it more than you can chew? Share your thoughts right here on Seibertron's own Energon Pub!

I remember sending you guys an email about this six days ago. Welp, that sucks for me.

On Prime 1 Studio's Facebook page, we have a full gallery of their upcoming statue, The Last Knight Drift, ID'd as MMTFM-22. Check out the full gallery of the toy on their Facebook page here, or by clicking the image below. We have also have the product description below, which includes it's accessories, and it's dimensions.

If you like what you see, well, we also may feel bad for your wallet. But tell us your thoughts in the Pub forums below, and your thoughts on such statues in general!

"No pain. No anger. No hate.” Prime 1 Studio is proud to present MMTFM-22: Autobot Drift from The Transformers: The Last Knight. Autobot Drift also known as Master Swordsman is a true martial artist in combat. Against his enemies, he wields legendary warrior skills with a mastery no one can match. He remains cool and collected in the heat of battle by channeling ancient samurai discipline. When the exact moment arrives to attack, he draws his razor sharp sword to strike down Decepticons in a fraction of a second. He is a supporting character in the 2014 movie, Transformers: Age of Extinction and its sequel Transformers: The Last Knight. Autobot Drift comes with two set of arms to give a different look of the Masterful Autobot Swordsman.
[Product Specifications] - Size approximately 23 inches tall [(H)58.3cm (W)45.5cm (D)36.5cm] - Size approximately with swords equipped [(H)58.3cm (W)53.7cm (D)52.8cm] - One (1) designed theme base - LED Light-up function on Head - One (1) set of arms Greeting gesture - One (1) set of arms holding swords [Notice] Prototype samples are shown. Product details could be subjected to change without further notice.

That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

D-Maximal_Primal wrote:

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

But they are wrong. Because only TRUE 100% accuracy for the bot mode can only be achieved with a statue / figure.

-Kanrabat- wrote:

D-Maximal_Primal wrote:

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

But they are wrong. Because only TRUE 100% accuracy for the bot mode can only be achieved with a statue / figure.

They are about as wrong as many G1 MPs are wrong. They are really accurate and are better than the statues cause they can transform. to me, they do it better justice by this fact. 100% perfection is only achievable on a statue yes, but that is the same for almost any design, including the new MPs, so I still say MPM Bee and Barricade are proof you can truly give justice to movie figures and still transform

D-Maximal_Primal wrote:

-Kanrabat- wrote:

D-Maximal_Primal wrote:

-Kanrabat- wrote:That Drift is pretty damn awesome.
And it's further proof that only high-end non-transforming figures can truly give the movie designs justice.

MPM Bumblebee and Barricade strongly disagree with you

But they are wrong. Because only TRUE 100% accuracy for the bot mode can only be achieved with a statue / figure.

They are about as wrong as many G1 MPs are wrong. They are really accurate and are better than the statues cause they can transform. to me, they do it better justice by this fact. 100% perfection is only achievable on a statue yes, but that is the same for almost any design, including the new MPs, so I still say MPM Bee and Barricade are proof you can truly give justice to movie figures and still transform

Yes, but that's not the point of the statue. The statue don't mean interaction. It only serve for the perfect look. Both serve different purposes. Thus it's like comparing apple and orange.

On Prime 1 Studio's Facebook page, we have a full gallery of their upcoming statue, Bumblebee Optimus Prime, ID'd as MMTFM-26. Check out the full gallery of the toy on their Facebook page here, or by clicking the image below. We have also have the product description below, which includes it's accessories, and it's dimensions. Of note, there are exclusive accessories for the, well, exclusive version, a Decepticon Seeker head and a forearm for the base!

If you love the Bumblebee movie Optimus, and have the cash to spend, this may be for you! If you enjoy or don't like what you see, tell us your thoughts on the Pub forums below!

“B-127, I pray this message finds you. Our war rages on. Planet Earth… Survival…” Prime 1 Studio is proud to present MMTFM-26: Optimus Prime Cybertron Edition from Transformers film, Bumblebee (2018 Film). The concept for the film was developed during the writers’ room assembled in the lead up to Transformers: The Last Knight and will be written by Christina Hodson and directed by Travis Knight. The old-fashioned storyline comes along with the brand newly discovery of our well-known Autobots member. Leader of the Autobot rebels during the war for Cybertron, Optimus Prime took part in the final battle for Cybertron against the Decepticons. He comes with two alternative right-arm holding the Ion Blaster and LED Light function on eyes. The Exclusive version comes with some Decepticon Seeker parts to be displayed on the base of Optimus Prime. This is a must have for all Transformers fans. 【Product Specifications】 ・Size approximately 32 inches tall [(H):81.9cm (W):50.6cm (D):44.9cm] ・Size approximately 32 inches tall with Blaster raised [(H):82.1cm (W):61.2cm (D):44.9cm] ・LED functions on Eyes ・One (1) designed base inspired from Cybertron planet ・Two (2) interchangeable Right-arm holding the Ion Blaster ・Decepticon Seeker parts (In the exclusive version only) [Notice] 3D renders for reference only. Prototype samples shown. Product details could be subjected to change without further notice.

As usual, Prime 1 knock it out of the park.
This look bad-ass!

He chonk in a good way

Just in from Prime 1 Studio on YouTube is a short unboxing video of the incredibly huge 37 inch tall Prime 1 Studios MMTFM-14 Transformers Dark of the Moon Shockwave! This amazing piece of art comes in parts which require assembly, including the giant tendrils of his pet Driller. This items comes at a hefty price tag of $2699.00 and is available through Prime 1 Studio directly. Read the product description below and check out the video before heading back here to share your thoughts in the forum. As always stay tuned to Seibertron for the ultimate in Transformers news!

"Here is the unboxing video of this enormous masterpiece - Shockwave Statue!
Let's assemble it together! Hopefully, it will be a helpful video for those who ordered this piece.

“Emotionless, coldly logical, utterly ruthless... killing is all Shockwave lives for.” — Optimus Prime

Prime 1 Studio is proud to present MMTFM-14: Shockwave from The Transformers: Dark of the Moon. Shockwave was left to watch Cybertron by Megatron long ago, arriving on Earth to hunt for the AllSpark shortly after Megatron. A peerless scientist with deadly efficiency and a cold devotion to logic, he is one of the very few who could rival Megatron. Shockwave is ready and willing to destroy the Autobots with his arm-mounted AstroMag Cannon. Most anticipated Decepticons Transformers Statue standing at 37 inches tall.

Specifications:
LED functions on eye, cannon and backpack

Notice:
Prototype samples shown.
Product details could be subjected to change without further notice."

Okay, that was one of he coolest videos I’ve seen and I don’t know a lot about prime 1 stuff so I gotta ask, are they just held together by magnets?

Damn. This is quite impressive and it's brilliant to see that everything hold with magnets. But man, one must take a mortgage in order to afford the thing and it's shipping cost!

Man that’s a lotta pieces. I thought it would be like arms and legs attaching to the torso. I loved this Shockwave design. Hopefully a Studio Series fig isn’t far off

Thanks to a few posts to TFsource's Twitter account yesterday we have some images of the amazing upcoming Bumblebee movie Soundwave statue from Prime 1 Studio. Still no official word on price or release yet but once you see this thing you will likely be quite willing to sit tight patiently and start saving money because, wow. This bot looks absolutely stunning and like he just came off the movie screen. As he was in the movie, this Soundwave comes with his stealthiest and most cunning of minions, the fearsome Ravage. Just ogle the details on not just Soundwave but Ravage too and you will think this is a genuine production model from the movie. As always share your thoughts in the forum and stay tuned to Seibertron for further details on this upcoming piece of toy art.

I can afford to look at the pretty pictures at least.

The design of Ravage's head looks more wolf-like than panther. Grant it he has always had a long snout, but definitely getting a more canine vibe here.

Ironhide516 wrote:The design of Ravage's head looks more wolf-like than panther. Grant it he has always had a long snout, but definitely getting a more canine vibe here.

I always saw Ravage as a "cat-dog".

-Kanrabat- wrote:

Ironhide516 wrote:The design of Ravage's head looks more wolf-like than panther. Grant it he has always had a long snout, but definitely getting a more canine vibe here.

I always saw Ravage as a "cat-dog".

Wasn't that a Nickelodeon cartoon back in the day

Whatever happened with that Arcee Stature we saw the prototype for, wasn't like last year?

Some of the Cybertron designs were really good and other ones like Soundwave just came out weird. I think it's mostly the head and the pelvis that are doing it. His head looks big and flat and they should have gotten rid of the red arrows.

i would like them to do the seekers

I always thought that Soundwave in this film looked like a costume. Because they did so well with it, I can't tell. Ravage looks a lot better than before.

Prime 1 Studios has given us some fantastic live action figures over the years, with highly detailed and very large statues representing our favorite on-screen heroes covering a wide range of characters from the Movie-verse. And to celebrate 8 years of producing these statues, they have revealed their newest offering for all to see: Revenge of the Fallen Optimus Prime!

Revenge of the Fallen Optimus Prime is a statue of giant proportions. Among his impressive and imposing presence is the fact that he stands 29 inches tall, so right up there with the Haslab Unicron in terms of size. And he certainly contains more detail and a truly impressive paint job. He also features a plethora of display options, which include different hands, arms, weapons, and more so you can customize him and up and make him look downright awesome.

While we don't have a release date or a price yet (though the statue will be expensive as past ones have been), we do have a bunch of nice images for the upcoming statue for you. We will share some below, and you can follow the above link to view the full gallery.

Check it out below, and let us know what you think in the comments section below!

Man, that's super cool. I like that it can replicate the pose from the statue at Transformers: The Ride (even down to the upside-down sword), and I don't think I ever realized that there were blue panels on the Ion blasters.

It's way too expensive, but they are at least really cool to look at (and great reference for painting).

EvasionModeBumblebee wrote:Man, that's super cool. I like that it can replicate the pose from the statue at Transformers: The Ride (even down to the upside-down sword), and I don't think I ever realized that there were blue panels on the Ion blasters.

It's way too expensive, but they are at least really cool to look at (and great reference for painting).

Funny, because the Universal studios ride is the only place I've ever seen these guys in real life. They are awesome, but too much for me.

They are extremely cool, but far too costly unless you have a lot of money or only collect things like this.

It is imposing and fantastic though, they always make great statues!

Browsing Facebook I found these images of what appears to be Dinobot for the line "Prime 1 Studio", I have nothing confirmed, even since the images from which they came out do not give information, we hope results.

They can see the Megatron and Optimus Primal heads, but the head of Dinobot is unknown, could it be that the same company is planning to make a statue of it too?, a render 3D of the Maximal was also shown.

https://www.facebook.com/VR.TransFans/p ... =3&theater
https://www.facebook.com/VR.TransFans/p ... =3&theater

With the lack of conventions this year, Prime 1 Studios made a really cool video to showcase all their upcoming statues. They make high end Transformers statues, usually movie themed, and were sure to include them as part of the presentation. They showed Age of Extinction Grimlock, Movie 1 Blackout and his companion Scorponok. These statues are MASSIVE. Just look at that screenshot of Blackout below. Most of these will be up for preorder very soon. We also have the video for you below, the Transformers begin at the 35 minute mark.

For the relatively rich guy who own a freaking MANSION.

-Kanrabat- wrote:For the relatively rich guy who own a freaking MANSION.

Maybe there are some movie stars who are fans.

Either way, they keep making these things, so some folks must be buying them.