Seibertron.com Energon Pub Forums

Wooooooooo! More MP cassettes! Now I really wish I had the funds/space for MP Soundwave. One day...

What I'm really looking forward to is an MP Rewind/Eject. Specifically so it can get redecoed into Rosanna, and more importantly, Flip Sides.

shajaki wrote:And these ones right?
*Pictures of awesome Cassettecons*

Yup. Gimme all the Cassette Robots!

Kurona wrote:I doubt we'll get the later-year cassetticons like Squawktalk unless they make them a redeco of Laserbeak though. At best the latest cassetticon we'll get would be Slugfest and Overkill since those are the last cassettes that appeared in the cartoon.

Pretty much why I went the 3rd party route for "almost-but-not-really" MP Cassettecons.

Kurona wrote:I doubt we'll get the later-year cassetticons like Squawktalk unless they make them a redeco of Laserbeak though.

I'm still surprised to hear people say things like this. There is no room in the MP line for no effort repaints. Like, if a character is different enough to have his own mold or midifications, he does. Best example I can think of to prove my point, TFCC's new Counterpunch. That's a clear instance of something that isn't right, but made workable, just cuz. Show me one time the MP line has done that? The only thing that comes close is MP-2 Ultra Magnus, but I still say it works because the OG toy did indeed have a fully transformable white Prime that looked like that.

shajaki wrote:

Kurona wrote:I doubt we'll get the later-year cassetticons like Squawktalk unless they make them a redeco of Laserbeak though.

I'm still surprised to hear people say things like this. There is no room in the MP line for no effort repaints. Like, if a character is different enough to have his own mold or midifications, he does. Best example I can think of to prove my point, TFCC's new Counterpunch. That's a clear instance of something that isn't right, but made workable, just cuz. Show me one time the MP line has done that? The only thing that comes close is MP-2 Ultra Magnus, but I still say it works because the OG toy did indeed have a fully transformable white Prime that looked like that.

This very set - Wingthing being a redeco of Ratbat

Kurona wrote:

shajaki wrote:

Kurona wrote:I doubt we'll get the later-year cassetticons like Squawktalk unless they make them a redeco of Laserbeak though.

I'm still surprised to hear people say things like this. There is no room in the MP line for no effort repaints. Like, if a character is different enough to have his own mold or midifications, he does. Best example I can think of to prove my point, TFCC's new Counterpunch. That's a clear instance of something that isn't right, but made workable, just cuz. Show me one time the MP line has done that? The only thing that comes close is MP-2 Ultra Magnus, but I still say it works because the OG toy did indeed have a fully transformable white Prime that looked like that.

This very set - Wingthing being a redeco of Ratbat

Invalid! Wingthing was redecoed from G1 Ratbat and included with Encore Soundblaster, therefore there is a precedent.

Sigma Magnus wrote:

Kurona wrote:

shajaki wrote:

Kurona wrote:I doubt we'll get the later-year cassetticons like Squawktalk unless they make them a redeco of Laserbeak though.

I'm still surprised to hear people say things like this. There is no room in the MP line for no effort repaints. Like, if a character is different enough to have his own mold or midifications, he does. Best example I can think of to prove my point, TFCC's new Counterpunch. That's a clear instance of something that isn't right, but made workable, just cuz. Show me one time the MP line has done that? The only thing that comes close is MP-2 Ultra Magnus, but I still say it works because the OG toy did indeed have a fully transformable white Prime that looked like that.

This very set - Wingthing being a redeco of Ratbat

Invalid! Wingthing was redecoed from G1 Ratbat and included with Encore Soundblaster, therefore there is a precedent.

It may be precedent, but it's still not accurate to his original appearance

In all seriousness that "unless they make them a redeco" thing was just on the side; that that's the ONLY way we'd ever get a Squawktalk from this line - not that it's likely.

Kurona wrote:

Sigma Magnus wrote:

Kurona wrote:

shajaki wrote:

Kurona wrote:I doubt we'll get the later-year cassetticons like Squawktalk unless they make them a redeco of Laserbeak though.

I'm still surprised to hear people say things like this. There is no room in the MP line for no effort repaints. Like, if a character is different enough to have his own mold or midifications, he does. Best example I can think of to prove my point, TFCC's new Counterpunch. That's a clear instance of something that isn't right, but made workable, just cuz. Show me one time the MP line has done that? The only thing that comes close is MP-2 Ultra Magnus, but I still say it works because the OG toy did indeed have a fully transformable white Prime that looked like that.

This very set - Wingthing being a redeco of Ratbat

Invalid! Wingthing was redecoed from G1 Ratbat and included with Encore Soundblaster, therefore there is a precedent.

It may be precedent, but it's still not accurate to his original appearance

It's accurate to his original Japanese appearance.

After the teaser the other day from Takara Tomy Mall directly, fellow Seibertronian Cyberpath has once more shared with us an update on the listing an exclusive Transformers Masterpiece cassettes set, featuring Stripes, Nightstalker, Wing Thing and Enemy now in full colour! Check them out below, and join the discussion in the Energon Pub.

With Nightstalker being a new mold, I think it's safe to assume that MP Broadcast's pack-in cassette will be Steel Joe Steeljaw.

Also, quite interesting that the set has the ID MP15/16-E, derived from the other two cassette sets.

I'm ALL about this! I'm ready.

Wingthing didn't quite end up in the color I was hoping for. But f*** it! AUDICONS!

I'm excited to see how Nightstalker transforms.

Awesome! How do I order them? I can't read Japanese. Is this the only venue to get them?

Masterpiece Blaster, Masterpiece Blaster... It's got to happen...

DecepticonFinishline wrote:AUDICONS!

I've never heard them called "Audicons" before, especially since the two cats are Autobots. Usually they're called Mini-Cassettes or Cassette Warriors (or just cassettes or tapes).

This is an Audi-Con:

Blackstreak wrote:Awesome! How do I order them? I can't read Japanese. Is this the only venue to get them?

They're exclusive to Takara Tomy Mall in Japan, but the TTM exclusives often end up as Asia retail exclusives as well so there's a chance of that happening. Either way we'll certainly see them imported through sites like TFSource and BBTS as well. Of course you could always try using a proxy service and order them directly, but that's not necessarily the cheapest rout.

Emerje

I like the look of Enemy and Wingthing.

While the colours look good on Stripes, I still think the mold is inferior to Device Label Ravage who could move his jaw, making him more expressive.

I never liked Nightstalker using Steeljaws molds. I always saw him as Ravage's twin and felt he should have shared Ravage's mold.

Anyway else find it interesting that if you translate Enemy's name to Hebrew, we've got a Transformer named Satan?

Windsweeper wrote:I like the look of Enemy and Wingthing.

While the colours look good on Stripes, I still think the mold is inferior to Device Label Ravage who could move his jaw, making him more expressive.

I never liked Nightstalker using Steeljaws molds. I always saw him as Ravage's twin and felt he should have shared Ravage's mold.

Anyway else find it interesting that if you translate Enemy's name to Hebrew, we've got a Transformer named Satan?

Unless I'm thinking about generation one figure of steel thought there was master piece version of that figure

Stripes looks kinda neat.

HOLY CATS!
Autobot cassettes?! AWESOME!
And a new Mold?! AWESOME!

Windsweeper wrote:Anyway else find it interesting that if you translate Enemy's name to Hebrew, we've got a Transformer named Satan?

Actually, Satan means Adversary in Hebrew. Oyeb is the transliterated word for enemy.

I hope Nightstalker's very weird looking missiles are just a play on that toy using Ravage's missiles instead of Steeljaw's cannons. Steeljaw will need some serious retooling from that to look right.


Transformers Encore Nightstalker Gallery

Windsweeper wrote:
I never liked Nightstalker using Steeljaws molds. I always saw him as Ravage's twin and felt he should have shared Ravage's mold.

Or instead of a black repaint of a black toy you could buy a second Ravage and slap an Autobot logo on him

WING THING!! I KNOW HIM!! I KNOWWWWWW HIMMMMMMMMMMMMM!!!!

MP Wing Thing forever!!

If you ship Frenzy and Enemy, do you get Frenemy?

kurthy wrote:If you ship Frenzy and Enemy, do you get Frenemy?

Yes.

ScottyP wrote:I hope Nightstalker's very weird looking missiles are just a play on that toy using Ravage's missiles instead of Steeljaw's cannons. Steeljaw will need some serious retooling from that to look right.

Just noticing Stripes's hind quarters are retooled. I wonder if they could combine Nightstalker's front half with Stripes's back to get Steeljaw?

Cobotron wrote:

ScottyP wrote:I hope Nightstalker's very weird looking missiles are just a play on that toy using Ravage's missiles instead of Steeljaw's cannons. Steeljaw will need some serious retooling from that to look right.

Just noticing Stripes's hind quarters are retooled. I wonder if they could combine Nightstalker's front half with Stripes's back to get Steeljaw?

Hmmm...yeeeessss..