Seibertron.com Energon Pub Forums

News Credits: 2 · by **Nemesis Destron** » Thu Jan 12, 2012 12:22 pm

I'll wait till people get their hands on him to find out what the QC factors are. He does look grand but I wish they would have done a better job with the back of his legs instead of leaving them looking hollowed out. :VEHI:

by **dinogeist** » Thu Jan 12, 2012 12:26 pm

the newest pics next to voyager TF Prime make no sense. because this 3rd party megatron is only a half a head taller than TF Prime voyager prime.

the puzzling part is the newest pics/info list this 3rd party megatron at 19 CM tall. that translates to 7.5 inches tall.

their is no way that TF Prime's voyager prime is around 7 inches tall.

PLEASE IF SOMEONE HAS A TF PRIME VOYAGER PRIME. Then PLEASE can you get a tape measure & measure the robot mode from head to toe. not from toe to smokestacks in robot mode.

another puzzling factor is that yesterday the 3rd party megatron was shown next to 4 hercules constructicons. and the 3rd party megatron was chest,shoulders,head taller than these third party constructicons.

if the 19 cm is true,then this puts the 3rd party megatron at 7.5 tall voyager/USA Ultra size scale.

if the 19 CM is true for this 3rd party megatron. then this means those hercules constructicons,some are deluxe size & some are short voyager size like animated lugnutz height. if this 19 cm is true then that TF Prime voyager prime is a very tall voyager 7 inch robot mode.

With all that said above,i'm gonna buy this 19 cm 3rd party megatron in june 2012. i was hoping it would come out before march 2012.

getting back to size,i was hoping it would be at least 8 inches tall in robot mode. so it could be a similar size scale to faith leader who is around 7 & 3/4 inches tall in robot mode. i was dreaming it would be AEC 9 inches leader size but somehow knew that was just a pipe dream based of the fact all the pics showed a robot mode that just wasn't wide nor bulky enough to merit leader toy bulk + wideness in robot mode.

i'm gonna wait & pray bbts.com gets this for pre-order. as they are the only site i trust.

News Credits: 1 · by **mattwhite924** » Thu Jan 12, 2012 12:34 pm

Nemesis Destron wrote:I'll wait till people get their hands on him to find out what the QC factors are. He does look grand but I wish they would have done a better job with the back of his legs instead of leaving them looking hollowed out.

Just making the plastic opaque would make the back of the legs look much better.

News Credits: 1 · by **Sodan-1** » Thu Jan 12, 2012 12:59 pm

OK, I'm officially torn on this one now. It's very All Hail Megatron, i.e. cool. I've already got all three Classics voyager Megatron figures and I think that mold does the job perfectly well. Will probably skip this simply because I'd be spending money on something that I don't feel is necessary for me. Roll out a Galvatron like this and I'll be in the lead pack for pre-orders.

News Credits: 3 · by **Kibble** » Thu Jan 12, 2012 1:01 pm

sky_fire12 wrote:damn it !! i was really hoping he would go in scale with MP-10. I really wish Takara would make a Megatron that looked like he didnt have skinny legs or at least have better articulation

Give it time...your wish is likely to come true.

by **gothsaurus** » Thu Jan 12, 2012 1:15 pm

Don't worry, I hear Takara is working on some kind of "subspace pocket" where extra matter would come from to flesh out those thin legs... would also be a great place to stash weapons and the trailer to various truck cabs.

Seriously.

News Credits: 8 · by **Megatron Wolf** » Thu Jan 12, 2012 1:26 pm

$99 isnt bad for a 3rd party figure but its still pricy for the size, it is pretty much just a fancy voyager. Plus factor in shipping & tax and its going to be closer to $150. Its cool but not that cool, $50 or $60 would be a perfect price range for this.

News Credits: 11 · by **kirbenvost** » Thu Jan 12, 2012 1:59 pm

Looks nice, and that price isn't too unreasonable. I think I can pass though, I already have Henkei Megs and he suits the purpose just fine. If this was more like $60 then I might consider.

News Credits: 402 · by **Mkall** » Thu Jan 12, 2012 2:06 pm

I'm very skeptical of this site... I'm going to wait for BBTS or RobotKingdom to get the figure. To me, this reeks of some sort of e-crime waiting to happen.

News Credits: 2 · by **Requiem Prime** » Thu Jan 12, 2012 5:35 pm

Mkall wrote:I'm very skeptical of this site... I'm going to wait for BBTS or RobotKingdom to get the figure. To me, this reeks of some sort of e-crime waiting to happen.

I just checked it out, and I'm skeptical too. Their only other item is Dr. Wu's Protector faces and they're only charging a dollar? What about their other stuff? What about other 3rd parties?

Toyworld is linking them, but I'm still going to wait until a bigger name picks it up.

News Credits: 1452 · by **Blurrz** » Thu Jan 12, 2012 5:46 pm

This looks rather legit. If it's around a hundy I'll bite.

News Credits: 402 · by **Mkall** » Thu Jan 12, 2012 6:07 pm

Ya know... I don't even think that's the real Fansproject Bombshell... looks like it could be the KO. I don't see the chain and something seems off about the colours of the weapons.

by **Vicalliose** » Thu Jan 12, 2012 6:21 pm

Wait wait wait. It's voyager sized? Now that elevates my opinion of this a little, especially if it's only a hundred bucks.

However... |:|

There's one big issue I see here. The inside of the legs are lined with translucent plastic for no particular reason. Now I'm sure I'm not the only one here who can agree that this is a horrible design choice. Seeing as said plastic is housing two major joints intended to bear the weight of the figure. Now with Hasblow I can see such a mistake easily being made. But when a fan company whom should be expected to put a great deal of thought into making a figure does something like this, like when Fansproject made the panels that hold colossus' arms in place so thin, it just makes me want to scream...

by **alternator77** » Thu Jan 12, 2012 6:26 pm

Mkall wrote:I'm very skeptical of this site... I'm going to wait for BBTS or RobotKingdom to get the figure. To me, this reeks of some sort of e-crime waiting to happen.

exactly its the same reason i havent preordered giant from upgrade commander as its the first ive heard of them.
looks good though but ill stick with my nerf megs

by **francismichael** » Thu Jan 12, 2012 6:43 pm

huhu he's not in scale with PP01.. AW...

News Credits: 1 · by **Lord Onixprime** » Thu Jan 12, 2012 6:56 pm

HasTak, this is how you do a Megatron figure.

by **dinogeist** » Thu Jan 12, 2012 7:26 pm

Mkall wrote:I'm very skeptical of this site... I'm going to wait for BBTS or RobotKingdom to get the figure. To me, this reeks of some sort of e-crime waiting to happen.

I also think this site that released these new pics toys & pre-order is a faker & did horrible mock up photo shopped pics.

the reason I think this site is a faker. is because yesterday had a different site that showed pics of the 3rd party megatron with some hercules constructicons. this 3rd party megatron appeared to be a tall $27 usa 8 inch ultra or short 8.5 inch leader sized toy next to the voyager sized hercules constructicons.

Sorry,Todays pics with the site make no sense. That TF Prime voyager sized prime is no where near around 7 inches tall. this site list this 3rd party megatron height as 19 CM which translates to 7.5 inches tall in robot mode. yet the pic with 3rd party megatron next to TF Prime voyager prime show almost the same exact robot height. with 3rd party megatron being only a 1/3 of a robot head taller than tf prime voyager prime.

PLEASE CAN SOMEONE WHO OWNS A TF PRIME VOYAGER SIZED PRIME TOY. PLEASE TAKE A TAPE MEASURE & MEASURE THE ROBOT MODE FROM HEAD TO TOE. Because I sincerly doubt this TF Prime Voyager Prime is 7 inches tall. most likely TF Prime voyager prime is around 6 & 1/3 inches tall from head to toe in robot mode.

I sensed this site was a faker hours ago in my previous reply in this thread. hopefully this site isn't trying to steal fellow TF fans money or credit card info.

Hopefully this isn't some malicious troll running this site trying to make donkeys out of fellow fans,trying to steal money/credit card info. or just trying to get a few laughs.

News Credits: 1 · by **tekering** » Thu Jan 12, 2012 9:02 pm

Relax, that's the deluxe Prime: Prime, not the Voyager Prime: Prime. >:oP

by **dinogeist** » Thu Jan 12, 2012 9:12 pm

tekering wrote:Relax, that's the deluxe Prime: Prime, not the Voyager Prime: Prime.

No,that's clearly the TF Prime voyager prime in the comparision pics with 3rd party megatron.

News Credits: 3 · by **Kibble** » Thu Jan 12, 2012 9:21 pm

Here's a useful scale post for this fig on TFW:

http://www.tfw2005.com/boards/transform ... ost7106974

He's smaller than I thought...in a good way. I'll probably pic this guy up if the quality's there.

by **DJrasmo** » Thu Jan 12, 2012 9:32 pm

You guys and your conspiracy theories are really taking the wind outta my sails...I was super excited for an actual g1- and cartoon accurate Megs who wasnt all "mary-kate and ashley" skinny, had a good mold and was good quality.

Now, though...I dunno. Now I have to resist getting my hopes up...and like some others have said, wait until BBTS gets them in stock to verify they are legit.

Still, nice pics to look at though :-P

News Credits: 1 · by **rpetras** » Thu Jan 12, 2012 11:34 pm

Some other guys suggested getting a prepaid credit card for the amount of the fig since they apparently don't take PayPal.

I'm considering this route.

If this was available on BBTS or RK it would have been preordered already.

News Credits: 5749 · by **El Duque** » Thu Jan 12, 2012 11:49 pm

rpetras wrote:Some other guys suggested getting a prepaid credit card for the amount of the fig since they apparently don't take PayPal.

I'm considering this route.

If this was available on BBTS or RK it would have been preordered already.

Same here, if this were available at BBTS, TFsource, or RK it would already be pre-ordered. I would even bite if this Third-Party Store took PayPal. I'm considering going the pre-loaded CC route though, because I really want this guy.

by **dinogeist** » Fri Jan 13, 2012 2:11 am

DJrasmo wrote:You guys and your conspiracy theories are really taking the wind outta my sails...I was super excited for an actual g1- and cartoon accurate Megs who wasnt all "mary-kate and ashley" skinny, had a good mold and was good quality.

Now, though...I dunno. Now I have to resist getting my hopes up...and like some others have said, wait until BBTS gets them in stock to verify they are legit.

Still, nice pics to look at though

I never said it wasn't a legit toy.

I guestioned the recent site who hosted pre-orders & pics. i said this site might not be legit & maybe did photo shopped fake pics.